Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (23) (entfernen)
Referierte Publikation
- nein (23)
Schlagworte
- Particle size (6)
- VSSA (4)
- Nano (3)
- Nano powder (3)
- Partikelgrößenverteilung (3)
- Analytische Zentrifuge (2)
- CLS (2)
- Nano particle (2)
- Nano screening (2)
- Nano-powder (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (23)
Im Vortrag werden das Messprinzip des Zentrifugen-Sedimentationsverfahrens erläutert und die Anforderungen der zugrundeliegenden Normen diskutiert. Es schließen sich umfangreiche Ausführungen zur praktischen Durchführung der Messung, insbesondere auch zu den vorbereitenden Arbeiten, sowie zur Auswertung der Rohdaten an. Gezeigt werden die Validierung sowie ein Beispiel zur regelmäßigen Verifizierung des Verfahrens. Nach Beispielen und Vergleichen zu Ergebnissen mit anderen Messverfahren, wird das Verfahren in einer Zusammenfassung bewertet.
Spray drying is a widely used process step in ceramic technology to
convert fine grained raw powders to free-flowing granules. Type and
amount of the organic additives (dispersants, binders and plasticizers)
define viscosity and stability of the slurry, the granulate structure and
the compaction behaviour.
Alumina and Zirconia powders were characterized with regard to
particle size, shape and specific surface area (BET). Zeta-potential
measurements by Stabino® were used to investigate the effect of
different dispersants on slurry stability. Unfortunately, this method is
restricted to suspensions with less than about 30% by weight of solid
content. The multi-sample analytical centrifuge LUMiSizer® overcomes
this problem. This device enables analysis of the separation behaviour
of suspensions over a wide range of solid content. On the basis of
position and time resolved photometric detection of transmitted light,
it is possible to determine the instability index, the sedimentation
velocity, and the sediment height in dependence of type and amount
of organic additives at various centrifugal accelerations. Additional
information is obtained from the shape of the transmission profiles.
Based on LUMiSizer® measurements, suitable additive concentrations
were derived. Thereby, the number of investigations by viscometry and
spray drying experiments can be significantly reduced.
Finally, it was possible to produce alumina, zirconia and ZTA aqueous
slurries with up to 80 weight-% of solid. The optimized suspensions
were successfully spray dried and the resulted granules show good
compaction behaviour.