Filtern
Dokumenttyp
- Zeitschriftenartikel (3) (entfernen)
Sprache
- Englisch (3)
Referierte Publikation
- ja (3)
Schlagworte
- Starch (3) (entfernen)
The aim of this work was the synthesis of starch macroinitiators for cationic polymer grafted starches that: (i) are free of cationic homopolymer, and (ii) display a high degree of conversion of the cationic monomer. We show that this can be achieved by a free-radical polymerization reaction using the cationic monomer N-methacryloyloxyethyl-N,N-dimethyl-N-benzylammonium chloride (MADAM-BQ) and a new starch-based macroazoinitiator. For this purpose, the acid chloride of 4-tert-butylazo-4-cyanovaleric acid was synthesized and bound covalently to starch (predominantly in the C6 position) to form a nonsymmetrically substituted macroinitiator that was used to polymerize MADAM-BQ in aqueous media. Essentially no MADAM-BQ homopolymer was formed. The initiator decomposes thermally to starch radicals of high reactivity and low-molar mass radicals that do not initiate polymerization. The reason for the different reactivities of the radicals is presumably due to the nonsymmetric constitution of the starch-bound azo groups. The graft polymerization of MADAM-BQ in aqueous solution performs according to an ideal overall kinetic. The structure of the synthesized starch-graft-poly(MADAM-BQ) products is similar to that of block copolymers because of the low radical efficiency of the starch initiators in aqueous solution. Especially, starch substrates with a higher content of azo groups did not lead to graft products with shorter graft distances because the state of solution of these macroinitiators becomes worse and aggregation occurs with an increasing degree of substitution.
The use of coconut fiber (CF) agricultural waste was considered as an environmentally friendly and inexpensive alternative in flame retarded biocomposites. To decrease the high content of aluminum trihydrate (ATH) required, the thermal decomposition (thermogravimetry), flammability [oxygen index (LOI) and UL 94 test] and fire behavior (cone calorimeter) of a combination of CF and ATH were investigated in a commercial blend of thermoplastic starch (TPS) and cellulose derivatives. CF induced some charring activity, slightly decreasing the fire load and burning propensity in cone calorimeter test. ATH decomposes endothermically into water and inorganic residue. Significant fuel dilution as well as a pronounced residual protection layer reduces the fire hazards. Replacing a part of ATH with coconut fibers resulted in improved flame retardancy in terms of ignition, reaction to small flame, and flame-spread characteristics [heat release rate (HRR), fire growth rate (FIGRA), etc.]. The observed ATH and CF synergy opens the door to significant reduction of the ATH contents and thus to interesting flame retarded biocomposites.
Polysaccharides are incorporated into cement based Systems in order to modify the rheological properties. Typically, cellulose ethers, sphingan gums, guar gum or starch ethers are applied. Depending upon their chemistry, molecular architecture, and adsorption tendency, polysaccharides interact differently with the entire cementitious system. Some stabilising agents like diutan gum mainly affect the cementitious paste; other stabilising agents like starch tend to interact with the sand fraction and even with the coarse aggregates. Cellulose and guar gum shows more diverse performances.
Typically stabilising admixtures like polysaccharides are used, when sophisticated rheological properties are adjusted. Therefore, polysaccharides are often used in combination with superplasticisers, which are added to reduce the yield stress of concrete. This can cause interactions, particularly when the stabilising Agent shows a strong tendency to adsorb on particle surfaces. Adsorptive stabilising agents may reduce the amount of adsorbed superplasticisers, thus affecting both viscosity and yield stress, while non-adsorptive stabilising agents mainly affect the plastic viscosity independently of the superplasticiser. Due to the strong influence of superplasticisers on the yield stress, influences of the stabilising agent on the yield stress retreat into the background, so that their major effect is an increase of the plastic viscosity.
The paper provides a comprehensive overview of how different polysaccharide superplasticisers affect cementitious flowable systems and points out the challenges of the combined use of polysaccharides and superplasticisers. Based on rheometric experiments and observations of the hydration process, time dependent effects on the workability as well as of the hydration of cement are presented and discussed.