Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (12) (entfernen)
Sprache
- Deutsch (6)
- Englisch (5)
- Mehrsprachig (1)
Schlagworte
- Boden (12) (entfernen)
Organisationseinheit der BAM
The total petrol hydrocarbon (TPH) content in soil is determined by gas chromatographic separation and flame ionisation detection according to ISO 16703 in routine laboratories for about 20 years. The development of the interlaboratory variability observed with this analytical procedure over 15 years in a proficiency testing scheme conducted annually with more than 170 participants is evaluated in detail. A significant improvement of the reproducibility standard deviation among participants is observed over the years and attributed to an increasing familiarity with the procedure. Nevertheless, the determination of TPH in the environmentally relevant mass fraction range between 500 mg/kg and 10 000 mg/kg in soils or sediments is far from reaching the reproducibility standard deviations predicted by the Horwitz curve. It is seen that laboratories with sporadic participation tend to report higher bias, while a core group of laboratories participating on a regular basis arrived at reproducibility standard deviations below 20 %. Results from a given laboratory obtained on two different samples tend to be highly correlated in the same PT round indicating a sound repeatability. Expectedly, the within-laboratory correlation between results from consecutive rounds was considerably lower. However, results from consecutive rounds with a temporal distance of 1, 2 or 3 years revealed largely similar correlations which suggests that the within-laboratory reproducibility adjusts to a constant level at least after a period of 1 year.
Microplastics can affect biophysical properties of the soil. However, little is known about the cascade of events in fundamental levels of terrestrial ecosystems, i.e., starting with the changes in soil abiotic properties and propagating across the various components of soil−plant interactions, including soil microbial communities and plant traits. We investigated here the effects of six different microplastics (polyester fibers, polyamide beads, and four fragment types: polyethylene, polyester terephthalate, polypropylene, and polystyrene) on a broad suite of proxies for soil health and performance of spring onion (Allium fistulosum). Significant changes were observed in plant biomass, tissue elemental composition, root traits, and soil microbial activities. These plant and soil responses to microplastic exposure were used to propose a causal model for the mechanism of the effects. Impacts were dependent on particle type, i.e., microplastics with a shape similar to other natural soil particles elicited smaller differences from control. Changes in soil structure and water dynamics may explain the observed results in which polyester fibers and polyamide beads triggered the most pronounced impacts on plant traits and function. The findings reported here imply that the pervasive microplastic contamination in soil may have consequences for plant performance and thus for agroecosystems and terrestrial biodiversity.
Soils are essential components of terrestrial ecosystems that experience strong pollution pressure. Microplastic contamination of soils is being increasingly documented, with potential consequences for soil biodiversity and function. Notwithstanding, data on effects of such contaminants on fundamental properties potentially impacting soil biota are lacking. The present study explores the potential of microplastics to disturb vital relationships between soil and water, as well as its consequences for soil structure and microbial function. During a 5-weeks garden experiment we exposed a loamy sand soil to environmentally relevant nominal concentrations (up to 2%) of four common microplastic types (polyacrylic fibers, polyamide beads, polyester fibers, and polyethylene fragments). Then, we measured bulk density, water holding capacity, hydraulic conductivity, soil aggregation, and microbial activity. Microplastics affected the bulk density, water holding capacity, and the functional relationship between the microbial activity and water stable aggregates. The effects are underestimated if idiosyncrasies of particle type and concentrations are neglected, suggesting that purely qualitative environmental microplastic data might be of limited value for the assessment of effects in soil. If extended to other soils and plastic types, the processes unravelled here suggest that microplastics are relevant long-term anthropogenic stressors and drivers of global change in terrestrial ecosystems.
Anhand der hier vorgestellten Untersuchungsergebnisse kann
eine umfassende Einschätzung des Korrosionszustands einer Gabionenkonstruktion aus Drähten mit Zink-Aluminium-Überzug nach 20 Jahren Einsatzzeit in Abhängigkeit von unterschiedlichen Expositionsbedingungen vorgenommen werden. Die festgestellten Massenverluste der Zink-Aluminium-Überzüge waren an den Untersuchungspositionen, insbesondere hinsichtlich der verschiedenen Expositionsbedingungen der Probenentnahmestellen, unterschiedlich ausgeprägt. Gabionendrähte, die im direkten Bodenkontakt standen, wiesen dabei die geringsten Restauflagen auf. Atmosphärisch beanspruchte sowie durch Vlies vor direktem Bodenkontakt geschützte Gabionendrähte zeigten dagegen etwas größere Restauflagen. Über den Drahtumfang wurden bei allen untersuchten Drahtproben stark variierende Schichtdicken festgestellt, was offensichtlich herstellungsbedingte Ursachen hat. Die Untersuchungen an der Gabionenkonstruktion haben gezeigt, dass die Annahme einer mittleren linearen Abtragsrate des metallischen Überzugs von 1 mm/a unter den hier untersuchten Bedingungen ein realistischer Wert ist. An Positionen mit direktem Bodenkontakt kann dieser Wert aber deutlich größer ausfallen, sobald sich die Aggressivität des Bodens erhöht. Eine Rotrostbildung war an den Drahtproben nicht feststellbar.
Seismische Methoden, die mithilfe elastischer Wellen Informationen über den Untergrund liefern, spielen in der Baugrunderkundung eine immer größere Rolle. Die einschlägigen Regelwerke weisen zwar auf diese Methoden hin, geben aber keine näheren Hinweise zu Methodenauswahl oder Einsatzbereichen. Das neue Merkblatt B08 'Seismische Baugrunderkundung', das seit Kurzem bei der DGZfP (Deutsche Gesellschaft für Zerstörungsfreie Prüfung) online und gedruckt auf Deutsch und Englisch erhältlich ist, will diese Lücke schließen. Die Grundlagen der Seismik werden kurz und knapp beschrieben, ebenso wie die zahlreichen Einzelmethoden mit ihren Anwendungsmöglichkeiten und Grenzen. Dabei wird sowohl auf Anwendungen von der Erdoberfläche aus wie auch auf Bohrlochmethoden und Offshore-Techniken eingegangen. Eine Applikationsmatrix hilft bei der Methodenauswahl. Hinweise zu Ausschreibungen fehlen ebenso wenig wie Maßnahmen zur Qualitätssicherung. Das Merkblatt richtet sich an alle, die seismische Messungen zur Baugrunderkundung ausschreiben oder anbieten bzw. mit den Ergebnissen arbeiten.---------------------------------------------------------------------------Information on methods, applications, contracting and quality assurance: Seismic methods, which are acquiring information about the subsurface using elastic waves, are more and more used in site investigation. These techniques and their fields of application are mentioned in standards and regulations but not described or explained in detail. The new guideline B08 'Site Investigation by Seismic methods' has been published by DGZFP (German Society for Non-Destructive Testing) recently and is available in print and online in German and English. Basic concepts of seismic exploration are described shortly as well as the numerous techniques including fields of application and limitations. This includes surface, borehole and offshore methods. Hints on fields of application are given in a matrix like structure. Comments on tendering and bidding are included as well as measures for quality assurance. This guideline is for all, who need or offer geophysical services.
Per Online-RFA und -LIBS Elementgehalte in Böden bestimmen.
Die ortsspezifische Steuerung der Bodenfruchtbarkeit durch angepasste Düngung und andere Maßnahmen hilft die Bodenfunktionen zu verbessern und Umweltbelastungen zu vermindern. Dabei zeigt das Beispiel die hohe Relevanz schneller, robuster Vor-Ort-Analysen für viele umweltrelevante Fragestellungen.