Filtern
Dokumenttyp
- Zeitschriftenartikel (2) (entfernen)
Sprache
- Englisch (2)
Schlagworte
- Autoignition temperature (2) (entfernen)
Explosion protection of oxidation reactions in micro reactors was investigated. Lange et al. (2014) reported on the possibilities of operating oxidation reactions in catalyst coated micro reactors within the explosion regime, but also warned about hotspot induced thermal runaway and detonation ignition at certain conditions. Methane and ethene, representing the explosion groups IIA1 and IIB (DIN EN ISO 16852), were used in stoichiometric oxygen mixtures with respect to total oxidation, which represents the worst case scenario in terms of safety assessment. Using laser radiation on a ceramic target inside of the micro channel, an artificial, controllable hotspot was generated. The ignition temperatures of fuel gas/oxygen mixtures inside a micro reactor were measured and their dependencies on initial pressure, initial temperature, volumetric flow rate, and micro channel height were examined. Deflagration reactions prior to the detonation were observed for the first time inside a micro reactor.
Self-contained underwater breathing apparatus (SCUBA) divers use different mixtures of nitrogen and oxygen as breathing gas. The so-called NITROX mixture often contains more oxygen than is contained in air and may increase the fire hazard in diving equipment. The SCUBA diving community, however, still differentiates between NITROX mixtures that contain more than 40 % oxygen or less. They consider a mixture with up to 40 % oxygen often as regular air. In filling operations of SCUBA cylinders, gas flows from high pressure to low pressure. Because of compressive heating, a sudden temperature rise in the gas occurs and nonmetallic materials, e.g., seals may ignite. BAM has used the pneumatic impact test to investigate the ignition sensitivity of ethylene propylene diene monomer (EPDM), fluorelastomer (FPM), polytetrafluorethylene (PTFE), polyetheretherketone (PEEK), and nylon (PA 6.6) to gaseous impacts in synthetic air, in various NITROX mixtures, and in pure oxygen. The test results clearly show that for nonmetallic materials, the maximum pressure of nonreaction in NITROX mixtures decreases at a content of 29 % oxygen in comparison to those in air. In addition, autoignition temperatures of the nonmetallic materials were also determined. The findings of this investigation support very well the results of other publications on oxygen enrichment. As a consequence of this study, in SCUBA diving, the same safety requirements for NITROX mixtures with more than 21 % oxygen should be applied as for pure oxygen in the industry.