Filtern
Dokumenttyp
- Zeitschriftenartikel (4) (entfernen)
Sprache
- Englisch (4)
Schlagworte
- 3D (4) (entfernen)
Organisationseinheit der BAM
In this paper one refined approach is applied to determine the exact orientation of bipyramidal TiO2 nanoparticles prepared with good dispersion as almost isolated particles on a carbon TEM grid. The advantages of the recently developed high-throughput Transmission Kikuchi Diffraction (TKD) are used to identify quickly and reliably the geometrical orientation of the crystalline TiO2 nanoparticle bipyramids (anatase) on a statistically relevant number of particles.
X-ray computed microtomography for the study of the soil-root relationship in grassland soils
(2013)
We present results from the analysis of three-dimensional X-ray computed tomography images of undisturbed soil samples in grassland sites. A strong positive correlation between root parameters and the solid surface/solid volume ratio was found. Preliminary analyses suggest that the relationship between soil structure and root patterns is related to the intensity of land management at the grassland sites, with reduced root volumes at sites with increased land use intensity.
The exploration of soil structure and its consequences for ecological functions is of prime importance for understanding of the 'critical zone.' In soils, the relationship between soil structure and plant roots—which influences water dynamics in soil—deserves special interest. With X-ray computed microtomography (micro-CT), soil structure and roots may be visualized and quantified simultaneously. We analyzed undisturbed soil samples from three grassland sites. After scanning the soil cores with an X-ray micro-CT scanner (resolution 40 µm), roots were delineated from the soil material and soil pore space by means of their X-ray grey value characteristics followed by the use of space transformation during image analyses. To determine efficacy of the X-ray micro-CT to identify roots, root volumes and surfaces were quantified with a standard root washing method showing good correspondence. A strong positive correlation between root volume and surfaces and the solid surface/solid volume ratio was found, with greater root growth in a more aggregated and porous soil. Preliminary analyses suggest that the relationship between soil structure and root patterns is related to the intensity of land management at the grassland sites, with reduced root volumes and surfaces at sites with increased land use intensity. This methodology has substantial potential for further research on management influences on soil structure and root growth across landscapes.
Slicing - a new method for non destructive 3D elemental sensitive characterization of materials
(2014)
Recent advances in synchrotron sources and detector technology have led to substantial improvements in spatial resolution and detection limits for X-ray fluorescence analysis (XRF). However, the non-destructive three-dimensional elemental sensitive characterization of samples remains a challenge. We demonstrate the use of the so-called 'Color X-ray Camera' (CXC) for 3D measurements for the first time. The excitation of the sample is realized with a thin sheet-beam. The stepwise movement of the sample allows getting the elemental distribution for each layer with one measurement. These layers can be combined to a full 3D dataset for each element afterwards. Since the information is collected layer by layer, there is no need to apply reconstruction techniques, which quite often are the reason for artifacts in the results achieved by computed tomography (CT). The field of applications is wide, as the 3D elemental distribution of a material contains clues to processes inside the samples from a variety of origins. The technique is of special interest and well suited for biological specimens, because their light matrix minimizes restricting absorption effects. Measurement examples of a hornet and the teeth of a Sorex araneus are shown.
Purpose – This paper aims to present an additive manufacturing-based approach in which a new strategy for a thermally activated local melting and material flow, which results in densification of printed structures, is introduced.
Design/methodology/approach – For enabling this self-organized relaxation of printed objects by the viscous flow of material, two interconnected structures are printed simultaneously in one printing process, namely, Structure A actually representing the three dimensional object to be built and Structure B acting as a material reservoir for infiltrating Structure A. In an additional process step, subsequent to the printing job, an increase in the objects’ temperature results in the melting of the material reservoir B and infiltration of structure A.
Findings – A thermally activated local melting of the polymethylsilsesquioxane results in densification of the printed structures and the local formation of structures with minimum surface area.
Originality/value – The present work introduces an approach for the local relaxation of printed three-dimensional structures by the viscous flow of the printed material, without the loss of structural integrity of the structure itself. This approach is not restricted only to the materials used, but also offers a more general strategy for printing dense structures with a surface finish far beyond the volumetric resolution of the 3D printing process.