Filtern
Dokumenttyp
- Vortrag (4)
- Posterpräsentation (3)
- Zeitschriftenartikel (2)
Schlagworte
- Lignin (9) (entfernen)
Organisationseinheit der BAM
Spherical lignin nanoparticles (LNPs) fabricated via nanoprecipitation of dissolved lignin are among the most attractive biomass-derived nanomaterials. Despite various studies exploring the methods to improve the uniformity of LNPs or seeking more application opportunities for LNPs, little attention has been given to the fundamental aspects of the solvent effects on the intrinsic properties of LNPs. In this study, we employed a variety of experimental techniques and molecular dynamics (MD) simulations to investigate the solvent effects on the intrinsic properties of LNPs. The LNPs were prepared from softwood Kraft lignin (SKL) using the binary solvents of aqueous acetone or aqueous tetrahydrofuran (THF) via nanoprecipitation. The internal morphology, porosity, and mechanical properties of the LNPs were analyzed with electron tomography (ET), small-angle X-ray scattering (SAXS), atomic force microscopy (AFM), and intermodulation AFM (ImAFM). We found that aqueous acetone resulted in smaller LNPs with higher uniformity compared to aqueous THF, mainly ascribing to stronger solvent−lignin interactions as suggested by MD simulation results and confirmed with aqueous 1,4-dioxane (DXN) and aqueous dimethyl sulfoxide (DMSO).
More importantly, we report that both LNPs were compact particles with relatively homogeneous density distribution and very low porosity in the internal structure. The stiffness of the particles was independent of the size, and the Young’s modulus was in the range of 0.3−4 GPa. Overall, the fundamental understandings of LNPs gained in this study are essential for the design of LNPs with optimal performance in applications.
Hydroliquefaction is a possible pathway to produce liquid transportation fuels from solid feedstocks like coal or biomass. Though much effort has been put into the investigation of maximizing the oil yield using expensive catalysts and pasting oils in batch setups, little is known about how to commercialize the process. This work aims at the demonstration of lignin hydroliquefaction under conditions interesting for commercial operation. The results from hydroliquefaction experiments of two different lignin types using a cheap iron-based catalyst and anthracene oil as the pasting oil in a semibatch system are presented here. Oil yields of above 50% are reached without observing coke formation. Extensive analyses of the feedstocks and product oils were performed. The process supplies high-quality oil, while differences in the decomposition path of both lignin types are observed. An high heating value of 39 400 J/g and H/C and O/C ratios of up to 1.6 and 0.1, respectively, are detected for the produced bio-oils.
Our approach includes the preparation of blends of preferably liquid-crystalline polyesters with Lignin, but also the synthesis of new polyesters with Lignin-related monomer units.
While most studies employ pulped Lignin directly, we first purified the Kraft Lignin by fractionation, followed by chemical modification of the terminal OH groups. Acetylation results in the reduction of glass transition temperatures (Tg) below 200°C, improved processability in the melt with complete melting of the Lignin sample, and higher thermostability.
These Lignin fractions were melt-mixed in a mini-twin-screw extruder with polyesters. The chemical structure of the polyesters was systematically varied between poly(ethylene terephthalate), (PET); poly(ethylene terephthalate-co-oxybenzoate), (PET/HBA); liquid crystalline polyesters with fully aromatic structure; and polyesters with Lignin-related monomers like ferulic and vanillic acid). The polymer influence on the blending behavior with Lignin was examined. SEM revealed phase-separated blends with partial compatibilization of the phases indicated by the shift of Tg’s. The influence of the polyester and the Lignin on decomposition and combustion was accessed by thermogravimetry (TGA), TGA-FTIR and pyrolysis-combustion flow calorimetry (PCFC) and compared to the decomposition of polyesters. The main focus was to achieve melt-spinnable blends for fibres with improved flame retardancy or as precursors for carbon fibers. Blends of Lignin fractions with the aromatic-aliphatic polyesters (here preferably PET/HBA) were successfully spun into fibers with lab-scale melt-spinning equipment. X-ray measurements revealed orientation of the fibers with Lignin. The E-moduli raised with increasing purity of the Lignin fractions (e.g., by removal of reducing sugars).
The structure of the polymer matrix determines the decomposition and combustion behavior of the blends with Lignin. Incorporation of aliphatic subunits reduces the amount of remaining char formed in TGA and PCFC from about 40-45 wt% for fully aromatic polyesters to 18-25 wt% for semiaromatic polyesters (at almost comparable carbon content in the polymer), while the maximum temperature of combustion decreased from 480-530°C for the former to 410-465°C for the latter. Lignin fractionation and acetylation yields samples with high char content (36 wt%) and extremely low heat release capacity (80-90 kJ/gK) with combustion maximum temperature at 405°C. Lignin/ PET/HBA blends combine the low HRC with intermediate char and offer interesting opportunities for polyester fibers with improved flame retardancy without adding P-containing FRs.
The flame retardancy behavior was explored by limiting oxygen index measurements on injection-molded parts and fibers.
Die Untersuchungen sind durch das das DFG Schwerpunktprogramm 1374 für Biodiversitätsforschung motiviert. Anhand des überwachten Abbaus von Totholz soll untersucht werden, welche Auswirkung unterschiedliche Formen und Intensitäten der Landnutzung auf die Biodiversität innerhalb von drei Exploratorien zeigen. Bei den vorangegangenen Studien wurden Nahrungs¬netzte auf organismischer Ebene sowie Klima- und Umgebungsdaten untersucht und die Veränderung des ausgebrachten Totholzes als Masseverlust erfasst. Es wird jedoch erwartet, dass in Anhängigkeit der beteiligten Organismen und Umgebungsparameter verschiedene Mechanismen des Holzabbaus vorliegen, die in unterschiedlichen Abbauraten der Holzkomponenten Lignin, Cellulose und Hemicellulose resultieren. Aus diesem Grund ist die quantitative Untersuchung des Ligningehalts an Hölzern ein wesentlicher Schritt für ein verbessertes Verständnis der Biodiversität in den untersuchten Exploratorien. Um der hohen Probenanzahl, die sich aus der Kontrolle von jeweils 100 Proben (Plots) in den drei Exploratorien für Hölzer aus 13 Baumarten ergibt, gerecht zu werden, wird eine schnelle und effiziente Untersuchungsmethode benötigt. Diese wird derzeit in Form einer NIR-spektroskopischen Bestimmung des Ligningehalts entwickelt. Um basierend auf den NIR Spektren vermahlener Holzproben Lignin und weitere Holzkomponenten korrekt vorherzusagen, muss zunächst basierend auf nasschemischen Analysen ein chemometrisches Modell kalibriert werden. Dazu ist die Charakterisierung von mindestens 20 – 30 Proben, die eine hohe Varianz des Ligningehalts aufweisen, notwendig. Im Vortrag werden erste Untersuchungs¬ergebnisse für die Vorhersage des Ligningehalts von Kiefernhölzern, die für ein Jahr in dem Exploratorium Schorfheide exponiert wurden, vorgestellt. Die anschließende explorative Datenanalyse (PCA) unter Verwendung von insgesamt 28 Variablen zur Beschreibung klimatischer und Umgebungsparameter weist eine Reihe interessanter Korrelationen auf. Demnach ist der Ligningehalt auf der ersten Hauptkomponente (29% erklärte Varianz) positiv mit dem C/N-Verhältnis und negativ mit Landnutzungsindex korreliert. Masseverlust und Temperatur hingegen dominieren die zweite Hauptkomponente (12% erklärte Varianz).
Im DFG-Schwerpunktprogramm 1374, Teilprojekt FunWood IV, erfolgt in Kooperation mit dem Institut für Bioanalytik an Hochschule für angewandte Wissenschaften, Coburg und dem Helmholtz-Zentrum für Umweltforschung (UFZ), Leipzig die Untersuchung des Ligningehalts von natürlich gealterten Hölzern. Zu diesem Zweck soll an der BAM eine NIR spektroskopische Methode entwickelt werden, die auch zur Untersuchung großer Stückzahlen geeignet ist. Insgesamt liegen exponierte Proben von 13 verschiedenen Hölzern vor, die sukzessive durch die Kooperationspartner kryovermahlen und getrocknet werden. Für jede der 13 Arten wurden jeweils 300 Holzstücken ausgebracht, exponiert und im Sommer 2018 wieder eingesammelt. Die Ergebnisse sollen als Grundlage für die Bewertung eines Langzeitversuchs zum Einfluss von Waldbewirtschaftungsintensität und Baumartenidentität über mehrere geographische Dimensionen dienen.
Mapping the Hydrophobic Composition of Lignosulfonates with 2D HIC-SEC aq. Liquid Chromatography
(2022)
2D-LC provides in-depth information on the complex composition of lignosulfonates – information hitherto inaccessible by state-of-the-art lignin analytics. Analysis of 12 industrial lignosulfonates revealed considerable differences in their composition and functional dispersity - properties that are crucial for lignosulfonate usage
Lignin has recently attracted the attention of the scientific community as a consequence of the potential depletion of fossil resources, being the most abundant biopolymer on earth after cellulose. Its industrial appeal lies on its renewability, facilitating the switch from fossil resources to environmentally friendly alternatives in terms of energy and chemicals production, materials engineering, and so on; and also on its abundant availability, since large amounts of lignin are obtained as a byproduct of the pulp and paper industry. Nevertheless, the main handicap of lignin consists on its variable structure, as it depends on the vegetable species of origin and on the production process from which it is isolated.
On the other hand, the biggest drawback of flexible polyurethane foams is represented by their bad demeanor against fire conditions. The use of effective halogenated flame retardants is more and more restricted due to their toxicity and their contribution to the destruction of the ozone layer. Latest efforts in improving this behavior have been focused on the synergy of different additives containing phosphorus and nitrogen and on the use of intumescent flame retardants. Lignin’s high carbon content and its phenolic crosslinked structure makes it the perfect candidate for addressing this issue.
Consequently, this work is focused on the effect of an industrially available lignin –softwood kraft lignin derived from southern pine- on the flame retardant properties of flexible polyurethane foams. Furthermore, seeking to improve the fire performance of these foams, the combined effect of lignin (L), layered double hydroxides (LDH) and a phosphorus containing flame retardant polyol (E) was also studied.
Water blown flexible polyurethane foams (PUF) were prepared using a polyether polyol and toluene diisocyanate (TDI) by one-shot free-rise method. A series of foams containing 5% by weight of lignin, 3 parts per hundred of polyol (pphp) of carbonate intercalated Mg-Al layered double and 5 pphp of a commercially available flame retardant (a phosphorus containing polyol) were prepared in order to study the effect on the properties of their introduction alone or in conjunction into the PUF formulation. For this purpose, different characterization techniques such as thermogravimetric analysis, cone calorimetry and limiting oxygen index were performed.
The high char residue obtained from the thermogravimetric analysis (TGA) of the lignin suggested that lignin could play a determinant role as a charring agent in the prepared PUF, which could be enhanced by the presence of an acid source such as phosphorus. On the other hand, its use in conjunction with LDH could help to improve the cohesion of the formed char layer, protecting more efficiently the underlying foam from combustion. Since the information provided by TGA is limited in terms of analyzing the contribution of lignin in the fire retardant properties of PUF, the potential charring effect of lignin and its combination with LDH and phosphorus containing polyol was furtherly studied by specific assays such as cone calorimeter and limiting oxygen index.
The presentation includes aspects of material design and characterization with a focus on lignin. Examples are the structural elucidation of lignosulfonates by means of two-dimensional chromatography, the mechanochemical degradation and functionalization of Kraft-Lignin with accompanying analytics. Future projects involving the incorporation of lignin into polymers will be presented.
Lignin is a highly aromatic low value biomass residue, which can be utilized for chemicals, fuels and materials production. In recent years, significant attention has focused on adsorber materials based on lignin. However, only 5% of the available lignin is exploited worldwide, thus significant opportunities for materials development still exist. Lignin has been vastly utilized as a feedstock for the synthesis of adsorbers for the removal of dyes and toxic organic molecules . To improve adsorption capacity, lignin can be chemically modified with oxygen-, nitrogen-, or sulfur-containing functional groups. Most frequently the phenolic groups of lignin were modified. In order to extend the application of lignin as adsorbers, we are especially interested in the chemical modification of this natural resource with a bio-based linear difluoro oligomers LOx (di- or monofunctional) or a heterocyclic monomer (Figure).