Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (6)
- Vortrag (4)
- Zeitschriftenartikel (2)
- Buchkapitel (1)
- Beitrag zu einem Sammelband (1)
Schlagworte
- Eddy current (14) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (4)
Eddy Current Technique is a powerful method for detection of surface notches and of buried flaws during inspection of metallic parts. Recent EC array probes have demonstrated a fast and efficient control of large surfaces. Nevertheless, when the size of flaws decreases or the defect is rather deep, traditional winding coil probes turn out to be useless. Magnetoresistive sensors present the advantages of flat frequency response and micron size. These sensors are hence very attractive for the detection of buried defects that require low frequencies because of skin depth effect. An optimization of the probe with magnetoresistive sensors as receivers has been made by simulations using CIVA software and finite elements methods with OPERA. EC probes for buried flaw detection have been designed. Experimental results have been compared with simulations.
Electromagnetic methods are widely used in Non-destructive Testing industries (NDT). In order to meet the requirements, safety-relevant products and structures have to be tested reliably during production or within subsequent maintenance cycles. For this purpose industrial users call for adapted testing methods which allow the detection of relevant defects such as cracks and pore in ferromagnetic or conductive materials. Automated testing systems and the application of sensor arrays are of great interest in order to enhance inspection quality and to decrease testing time and costs. Magneto resistance (MR) sensors like giant magneto resistance (GMR) or tunnel magneto resistance sensor (TMR) have proofed their suitability in many NDT-applications due to their extraordinary properties which combine high field sensitivity, a high spatial resolution and low costs. Due to their small size these sensors can be useful – in addition to the pure detection task – for a more detailed defect characterization and defect reconstruction providing defect size, orientation and geometry. This chapter gives a brief introduction of electromagnetic testing methods, i.e., magnetic particle inspection (MPI) and eddy current testing (ET), followed by two different approaches for which MR sensor arrays were successfully adapted.
The application of composite pressure vessels is of great interest due to tremendous weight saving. Nevertheless, ageing of CFRP (carbon fiber reinforced plastic) composites pressure vessels underlies complex interactions between metallic liner and composite and is not fully understood yet. One main challenge is the application of appropriate testing methods for detecting the influences of pressure cycles and creep behavior on the material. This contribution presents results achieved by using conventional eddy current testing (ET) and high frequency ET. Here, we could show that also conventional ET with low frequencies are useable to investigate pressure vessels of different material combinations like aluminum-CFRP and synthetics-CFRP.
In recent years, additive manufacturing technologies have gained in importance. Laser powder bed fusion can be used for complex functional components or the production of workpieces in small quantities. High safety requirements, e.g. in aerospace, demand comprehensive quality control. Therefore, non-destructive offline inspection methods such as computed tomography are used after production. Recently, online non-destructive testing methods such as optical tomography have been developed to improve profitability and practicality. In this presentation, the applicability of eddy current inspection using GMR sensors for online inspection of PBF-LB/M parts is demonstrated. Eddy current testing is performed for each layer during the production process at frequencies uo to 1.2 MHz. Despite the use of high-resolution arrays with 128 elements, the testing time is kept low by an adapted hardware. Thus, the measurement can be performed during the manufacturing process without significantly slowing down the production process. In addition to the approach, the results of an online eddy current test of a step-shaped test specimen made of Haynes282 are presented.
Main concept of magnetism and, therefore, of magnetic imaging can be subdivided into different levels, macroscopic, magnetic domain, and atomic. While conventional sensor solutions cover only the macroscopic level, the spatial resolution of GMR (Giant Magneto Resistance) sensors go down to the domain scale. In addition, those low cost sensors are well suited for automotive and industrial applications, particularly high-speed solutions. Main reason is their outstanding performance in terms of high spatial resolution, high accuracy, high bandwidth combined with field sensitivity, energy efficiency and durability.
In contrast to industrial use, down to the present day GMR sensors do not get beyond scientific scope in case of non-destructive testing (NDT) applications. Nevertheless, there are scientific and industrial NDT applications in which adapted GMR sensor can be promising compared to the conventional NDT methods.
This contribution summarizes findings at the BAM over the last decade which demonstrates the preeminent properties of GMR-based testing solutions. This comprises the active and passive testing of different materials with hidden defects and flaws near geometric boundaries like edges where conventional methods meet their limits. Another promising application for adapted GMR sensors is the characterization of magnetic materials, where the sensors provide additional information on microstructure, mechanical stress state, phase transformations and their interaction with magnetic fields. The examples show the need and benefit of NDT adapted GMR sensors.
Control and data acquisition of automated multi-sensor systems - two examples from civil engineering
(2010)
Aufgrund eines anhaltenden Trends der Miniaturisierung von Bauteilen sowie eines gesteigerten Qualitätsanspruches in Fertigung und Instandhaltung besteht ein wachsender Bedarf für hochauflösende zerstörungsfreie Prüfverfahren. Ein derzeit vielversprechender Lösungsansatz in der elektromagnetischen Prüfung wird durch die magnetischen Mikrosysteme eröffnet. Insbesondere die jüngst mit dem Physik-Nobelpreis ausgezeichnete GMR-Technologie bietet neben einer hohen Feldempfindlichkeit zugleich hervorragende Ortsauflösungen mit Schichtabmessungen bis in den unteren µm-Bereich. Hierdurch werden magnetische Feldverteilungen bei der Wirbelstromprüfung oder der Streuflussprüfung mit einem gegenüber Spulensystemen erhöhten Signal/Rausch-Verhältnis (SNR) und einer verbesserten Ortsauflösung gemessen. Im vorliegenden Beitrag wird das Potenzial der MR-Technologie anhand der Wirbelstromprüfung von Drähten verdeutlicht. Hierbei wird ein kreuzförmiges GMR-Sensor-Array um den zu untersuchenden Draht positioniert. Jeder einzelne GMR-Sensor misst dabei mit einer Feldempfindlichkeit von etwa 200pT/√Hz und einer Ortsauflösung von 100µm. Der Nachweis von im Durchmesser etwa 200µm großen Defekten in einer Tiefenlage von 200µm unterhalb der Drahtoberfläche gelingt mit einem SNR von über 400. Oberflächendefekte ähnlicher Größenordnung können mit einem SNR von nahezu 104 detektiert werden. Ein derart hohes SNR birgt in Kombination mit der hohen örtlichen Auflösung Potenzial für eine 3D-Fehlerlokalisierung. Unter Verwendung eines analytischen Ansatzes sowie auf FEM beruhende Dateninversionsalgorithmen können Defekte mit einer Abmessung von größer 200µm auf einige 10µm exakt lokalisiert werden.
High speed non-destructive rail testing with advanced ultrasound and eddy-current testing techniques
(2009)
Today the rails face increased exposure to heavy loads, higher speeds and a very dense overall traffic. A continued development of testing methods for the rail inspection trains became necessary to match the modern needs for a fast detection and detailed classification of defects. To guarantee the safe operation of rail traffic non-destructive inspection techniques with combined ultrasound and eddy current testing methods are used to detect damages on rails. One of the main actual challenges of automated rail testing is the high inspection speed which is very close to the physical limits. To overcome these limits digital signal processing algorithms have to be used which maintain resolution and detection quality independent of operation speed. This paper presents a recently developed state of the art rail inspection system which uses advanced ultrasonic and eddy current testing techniques. Testing results are shown in a newly developed so called Glassy-Rail-Diagram which is capable to present data with a fixed resolution independent of inspection speed.
High speed non-destructive rail testing with advanced ultrasound and eddy-current testing techniques
(2009)
A composite material is a combination of two or more materials with very different mechanical, thermal and electrical properties. The various forms of composite materials, due to their high material properties, are widely used as structural materials in the aviation, space, marine, automobile, and sports industries. However, some defects like voids, delamination, or inhomogeneous fiber distribution that form during the fabricating processes of composites can seriously affect the mechanical properties of the composite material. In this study, several imaging NDE techniques such as: thermography, high frequency eddy current, ultrasonic, x-ray radiography, x-ray laminography, and high resolution x-ray CT were conducted to characterize the microstructure of carbon fiber composites. Then, a 3D analysis was implemented by the destructive technique of serial sectioning for the same sample tested by the NDE methods. To better analyze the results of this work and extract a clear volume image for all features and defects contained in the composite material, an intensive comparison was conducted among hundreds of 3D-NDE and multi serial sections’ scan images showing the microstructure variation.