Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (47)
- Beitrag zu einem Tagungsband (37)
- Zeitschriftenartikel (31)
- Beitrag zu einem Sammelband (16)
- Forschungsbericht (14)
- Posterpräsentation (11)
Sprache
- Englisch (89)
- Deutsch (66)
- Mehrsprachig (1)
Schlagworte
- VOC (29)
- Emission test chamber (22)
- Emissionen (9)
- Volatile organic compounds (9)
- SVOC (8)
- Formaldehyde (7)
- Blauer Engel (6)
- Formaldehyd (6)
- OSB (6)
- VVOC (6)
- Construction products (5)
- Emission (5)
- Emissions (5)
- Round robin test (5)
- Thermal desorption (5)
- Dust (4)
- Holzwerkstoffe (4)
- Interlaboratory study (4)
- Ozone (4)
- Particle board (4)
- Prüfverfahren (4)
- VOC-Emission (4)
- AgBB (3)
- Copiers (3)
- ISO 16000-6 (3)
- Laserdrucker (3)
- Ozon (3)
- Printers (3)
- Reference material (3)
- Staub (3)
- UFP (3)
- Volatile organic compound (3)
- 3D printer (2)
- AgBB evaluation scheme (2)
- AgBB-Schema (2)
- Air exchange rate (2)
- Aldehyde (2)
- Bauprodukte (2)
- Blue Angel (2)
- Bodenbeläge (2)
- Building product (2)
- Building products (2)
- Bürogeräte (2)
- Bürogeräte mit Druckfunktion (2)
- CO2 assisted impregnation (2)
- Carbograph 5TD (2)
- Carbopack X (2)
- Cascade impactor (2)
- Chamber test (2)
- Construction product (2)
- Consumer products (2)
- Cultural heritage (2)
- DIN EN 16516 (2)
- Drucker (2)
- EN 16516 (2)
- Emission chamber (2)
- Emission chamber testing (2)
- Emission studies (2)
- Emissions testing (2)
- Emissionsmesskammer (2)
- Emissionsmesskammern (2)
- Emissionsmesszelle (2)
- Environmental label (2)
- European standard (2)
- External quality management system (2)
- Foam tiles (2)
- Healthy homes and buildings (2)
- Holz (2)
- Indoor air (2)
- Indoor air quality (2)
- Kopierer (2)
- Loading factor (2)
- Oriented strand board (2)
- Partikelemissionen (2)
- Photocatalysis (2)
- Polymeric material (2)
- Product emission testing (2)
- Product safety (2)
- Proficiency testing (2)
- RAL-UZ 122 (2)
- TVOC (2)
- Tenax thermal desorption (2)
- Thermal extraction (2)
- Thermodesorption (2)
- Titanium dioxide (2)
- VOC emission (2)
- VOC-Emissionen (2)
- VOC-emission (2)
- 3-D-printing (1)
- 3D printing (1)
- Abklingverhalten (1)
- Accuracy (1)
- Aerosol (1)
- Aerosole (1)
- Aerosols (1)
- AgBB Scheme (1)
- AgBB scheme (1)
- Air cleaning (1)
- Aldehydes (1)
- Alterung (1)
- Antioxidant (1)
- Antioxidantien (1)
- Bewertung (1)
- Biocide (1)
- Biocides (1)
- Blue LED light (1)
- Building material (1)
- Bürogerät (1)
- Bürogeräte mit Laserdruckfunktion (1)
- CCQM (1)
- Carbotrap 300 (1)
- Cell (1)
- Certification/labelling (1)
- Chamber (1)
- Chamber measurement (1)
- Chamber-test (1)
- Chemical characterization (1)
- Chemische Emissionen (1)
- Chemistry (1)
- Comparison (1)
- Construction Products (1)
- Construction and renovation (1)
- Construction materials (1)
- Consumer article (1)
- Cyclosiloxanes (1)
- DIN EN 717-1 (1)
- Degradation (1)
- Direct thermal extraction (1)
- Dynamic calibration gas mixtures (1)
- Dynamic gas generation (1)
- EN 717-1 (1)
- EN 717-3 (1)
- Emerging Contaminants (1)
- Emission Test Chamber (1)
- Emission Testing (1)
- Emission chamber test (1)
- Emission from materials (1)
- Emission measurements (1)
- Emission tests (1)
- Emissionsarme Materialien (1)
- Emissionsmessungen (1)
- Emissionsprüfkammer (1)
- Emissionsprüfkammern (1)
- Emissionsprüfung (1)
- Emisson testing (1)
- Ethanol (1)
- Evaporation (1)
- FFF-3D-Printer (1)
- Feine und ultrafeine Partikel (1)
- Flask method (1)
- Flüchtige organische Verbindungen (1)
- Focus area (1)
- Fußbodenbelagskleber (1)
- GC/MS (1)
- Gas mixing system (1)
- Geruchsmessungen (1)
- Glas (1)
- Glasmalerei (1)
- Hard copy devices (1)
- Hardcopy device (1)
- Hardcopy devices (1)
- Hardcopygerät (1)
- Indoor Air Quality (1)
- Indoor Products (1)
- Inhalation exposure (1)
- Innenraumluft (1)
- Inter laboratory study (1)
- Interlaboratory comparison (1)
- Kammermessungen (1)
- Kleber (1)
- Kulturguterhaltung (1)
- Laborvergleich (1)
- Laser printer (1)
- Laserprinters (1)
- Leimholz (1)
- Low gas concentrations (1)
- Luftschadstoffe (1)
- Material and construction (1)
- Medieval staind glass (1)
- Methanol (1)
- Micro-chamber (1)
- Microchamber (1)
- Monoterpene (1)
- Möbel (1)
- OSB-Platten (1)
- Odour (1)
- Odour measurement (1)
- Oriented Strand Board (1)
- Oriented strand boards (OSB) (1)
- Particle emissions (1)
- Particles (1)
- Partikel (1)
- Partikelemission (1)
- Perceived intensity (1)
- Pilot comparison (1)
- Pine wood (1)
- Plywood (1)
- Plywood Board (1)
- Poficiency test (1)
- Polyurethane foam (1)
- Printer emission (1)
- Product certification (1)
- Proficiency Test (1)
- Prüfkammer (1)
- Reduktion (1)
- Reference materials (1)
- Ringversuch (1)
- Risk assessment (1)
- Round robin (1)
- Rround robin test (1)
- Safety (1)
- Schadgase (1)
- Schutz vor Kunst- und Kulturgut (1)
- Secondary emissions (1)
- Semi volatile organic compounds (1)
- Sorptive construction materials (1)
- Sources/emissions (1)
- Technology (1)
- Tenax (1)
- Terpenes (1)
- Test chamber (1)
- Test chambers (1)
- Test gas generation (1)
- Test method validation (1)
- Test procedure (1)
- Testing method (1)
- Thermal Desorption (1)
- Thermal Extraction (1)
- Thermoplastic filaments (1)
- Toner (1)
- UV-light (1)
- Ultra fine particle (1)
- Ultrafine particles (1)
- Umweltsimulation (1)
- Umweltzeichen (1)
- Unsaturated aldehydes (1)
- VOC Emission (1)
- VOC analysis (1)
- VOC emissions (1)
- VOC gas mixtures (1)
- VOCs and SVOCs (1)
- Verlegewerkstoffe (1)
- Verpackungsmaterialien (1)
- Volatile Organic Compounds (1)
- Volatile organic compound (VOC) (1)
- Wood (1)
- Wood Products (1)
- Wooden toys (1)
- beschichtete Holzwerkstoffe (1)
Organisationseinheit der BAM
Paper des Monats
- ja (1)
Eingeladener Vortrag
- nein (47)
There has been an increasing use of oriented strand boards (OSBs) for the construction of floors, ceilings and walls of buildings. In Germany and other European countries, OSBs are mainly produced from pine wood (Pinus sylvestris). In response to complaints about the odour and irritation of mucous membranes in connection with the use of OSBs, samples of OSBs were bought from do-it-yourself stores to test their volatile organic compound (VOC) emissions by using emission test chambers. The boards emitted predominantly monoterpenes, aldehydes, acids and acetone. Aldehydes are generated during the production process by the oxidation of unsaturated fatty acids such as linoleic acid. Pine wood, compared with other wood species, contains more unsaturated fatty acids. Of the six acquired OSBs, four boards from three manufacturers would not meet the requirements of the German AgBB (Ausschuss zur gesundheitlichen Bewertung von Bauprodukten, Committee for Health Evaluation of Building Products), mainly because of the emissions of unsaturated aldehydes. These compounds have low LCI values (lowest concentration of interest) and are therefore problematic substances based on a health-related evaluation of building products according to the AgBB scheme.
Wood and wood products are often used as construction material for buildings and even more for furniture and indoor decoration. Therefore Chemical emissions from wood have an influence on the indoor air quality. A research project financed by the Federal Environmental Agency focused on VOC emissions from oriented Strand boards (OSB) and also from plywood made from pine and spruce (Wilke et al., 2011a). This paper shows results of the plywood testing because only little information is available about plywood emission behaviour and its impact on indoor air quality.
In diesem Vorhaben wurden 8 OSB-Platten und sieben Leimholzplatten aus Baumärkten gemäß den Vorgaben des AgBB-Schemas in Emissionsmesskammern geprüft. Hinzu kamen Messungen an 17 im Technikum hergestellten OSB, an denen der Einfluss von Herstellungsparametern auf VOCEmission untersucht wurde. Grundsätzliches Ziel war es, durch die Untersuchungen Lösungsansätze für die Emissionsminderung von VOC aus Holzwerkstoffen zu finden. Dazu wurde auch der Einsatz von Antioxidantien bei der OSB-Herstellung getestet. Die Emissionen des Rohstoffes Kiefernholz wurden an 6 Proben aus Splint- oder Kernholz aus unterschiedlichen Stammabschnitten einer frisch gefällten Kiefer untersucht. Insgesamt konnte mit dem Projekt gezeigt werden, dass einige der im Handel erhältlichen OSB und auch Leimhölzer eine Bewertung nach dem AgBB-Schema aufgrund von zu hohen Aldehyd- und Terpenemissionen nicht bestehen. Für die Aldehydemissionen (insbesondere Hexanal und ungesättigte höhere Aldehyde) konnte durch den Einsatz von Antioxidantien bei der OSB-Herstellung eine Verminderung auf ein Drittel erreicht werden, allerdings stiegen dadurch die Terpenemissionen an. In this project, eight Oriented Strand Boards (OSB) and seven plywood boards from DIY stores were tested in emission test chambers according to the AgBB schemes specifications. In addition, 17 OSBs manufactured in a pilot plant were tested to investigate the effect of production parameters on VOC emission. The use of antioxidants in OSB production was also tested. The main objective of the investigation was to find potential solutions for reducing VOC emissions from timber materials. The emissions from pine wood were investigated on six sapwood or heartwood samples from different trunk sections of freshly felled pine. The projects results show that, due to their high aldehyde and terpene emissions, some types of commercially available OSB and plywood did not meet the AgBB schemes requirements. By using antioxidants in OSB production it was possible to reduce aldehyde emissions (especially hexanal and unsaturated higher aldehydes) to one third. However, this caused an increase in terpene emissions.
11 laser printers from 5 manufacturers were purchased in 2017 and tested for their UFP emissions. Size resolved sampling of the emitted particles was done with a 13 stage (30 nm to 10 µm) low pressure cascade impactor. The sampled particles were analysed for their chemical composition by thermal extraction (vaporization at 290°C) followed by GC-MS analysis. High boiling cyclic siloxanes (D10 to D16) were detected as constituents of UFP from laser printers. In comparison to measurements in 2008, aliphatic long-chain alkanes (C22 to C34) were detected additionally as chemical constituents of UFP from most of the tested printers and their amounts were higher than for cyclic siloxanes. Printers of one manufacturer showed very low UPF emissions compared to the other manufacturers.
A screening test for potential emissions of volatile organic compounds (VOC) was run on different thermoplastic filaments used for 3D printing. The method of direct thermal desorption was used to simulate the high temperatures during the 3D printing process and to identify the main compounds emitted from the filaments. A )arge number of unexpected compounds were detected that might affect the user's health and have an impact on indoor air chemistry.
In diesem Projekt wurde das Prüfverfahren für die chemischen Emissionen zum RAL-UZ 38 überarbeitet. Dabei stand die Bewertung der Prüfkammermessungen mit Hilfe des AgBB-Schemas im Vordergrund. Dafür wurden die Prüfkammerbedingungen angepasst. Mit Hilfe einer Emissionsdatenbasis wurden Anforderungen an die Emissionen der Umweltzeichenprodukte abgeleitet. Die Datenbasis bildeten vorhandene Emissionsdaten der Umweltzeichenprodukte und Messungen aktueller Produkte. Dazu wurden 10 Prüfkammermessungen an unterschiedlichen Möbelplatten durchgeführt. In Zusammenarbeit mit den Lizenznehmern, dem RAL und dem Umweltbundesamt wurde ein neues Verfahren für die Auswahl der Prüfmuster für die Emissionsmessung erarbeitet. Dieses vereinigt eine repräsentative Auswahl mit einer regelmäßigen Nachprüfung einzelner Möbel und/oder Bauteile. Zudem wurden Kriterien für die Überprüfung der Anforderungen an die Herkunft des Holzes aufgestellt. Für Bodenbeläge, Paneele und Türen aus Holz und Holzwerkstoffen für Innenräume wurde eine
neue Vergabegrundlage erschaffen (RAL-UZ 176).
Der Innenraumluftrichtwert für Formaldehyd in Höhe von 0,1 ppm ist durch das BfR bestätigt worden und bleibt bis auf weiteres bestehen. Die Prüfbedingungen für Formaldehydemissionen aus Holzwerkstoffen dagegen sind nicht mehr aktuell. Das Prüfverfahren für Holzwerkstoffe gilt seit 1991 und basiert auf dem Gebäudestandard von 1984. Eine Definition und Anpassung der Prüfbedingungen an moderne „dichtere“ Bauweise ist notwendig. Es zeigt sich, dass für Verbraucherinnen und Verbraucher eine Unterscheidung von formaldehydbelasteten und -unbelasteten Produkten in der Praxis schwierig ist. Es kann zu fehlerhaftem Einsatz und nicht fachgerechter Verarbeitung der Holzwerkstoffe kommen. Das Ziel des Vorhabens ist die möglichst sichere Einhaltung des Schutzniveaus durch die Anpassung der Prüfbedingungen an den heutigen Gebäudestandard. Es werden das Projekt (UFOPLAN-Vorhaben FKZ 3714 95 310 0) und erste Messergebnisse vorgestellt. Erste Messungen von Holzwerkstoffen im laufenden Vorhaben unter „worst case“-Bedingungen (erhöhte Beladung, geringer Luftwechsel) zeigen hohe Formaldehyd-Emissionen.