Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (88)
- Beitrag zu einem Tagungsband (39)
- Zeitschriftenartikel (23)
- Beitrag zu einem Sammelband (7)
- Posterpräsentation (6)
- Sonstiges (1)
Sprache
- Deutsch (82)
- Englisch (81)
- Mehrsprachig (1)
Schlagworte
- Fatigue (14)
- Non-destructive testing (8)
- Damage evolution (7)
- Betriebsfestigkeit (5)
- CFRP (5)
- Composite (5)
- Faser-Kunststoff-Verbunde (5)
- Wind turbine blades (5)
- Crack propagation (4)
- Fracture mechanics (4)
- Fully developed fire (4)
- Polymer matrix composites (4)
- X-ray refraction (4)
- Damage mechanics (3)
- Druckbehälter (3)
- Faserverbundwerkstoffe (3)
- Fire stability (3)
- Fracture (3)
- Fracture toughness (3)
- Glass fiber reinforced polymers (3)
- Kurzfaserverstärktes Polyamid (3)
- NDT (3)
- Rissfortschritt (3)
- Rotor blade (3)
- Röntgenrefraktionsmessung (3)
- Self-healing (3)
- Spar cap design (3)
- Thermomechanics (3)
- Windenergie (3)
- X-ray-refraction (3)
- CFK (2)
- Composites (2)
- Condition monitoring (2)
- Crack resistance (2)
- Cross linking (2)
- Cure process (2)
- Curing kinetics (2)
- Dauerfestigkeitsgrenze (2)
- Dynamic mechanical analysis (DMA) (2)
- Epoxy (2)
- Epoxy resin (2)
- Faserkunststoffverbund (2)
- Faserkunststoffverbunde (2)
- Fatigue of sandwich shell structures (2)
- Fibre reinforced plastics (FRP) (2)
- Fractography (2)
- High-temperature properties (2)
- In-situ effect (2)
- Luftultraschall (2)
- Mikrorissbildung (2)
- Modal analysis (2)
- Multiaxial loading (2)
- Non-destructive testing (NDT) (2)
- Nondestructive testing (2)
- Picture frame test (2)
- Plastics (2)
- Polymer Matrix Composites (2)
- Pultruded fibre rods (2)
- Rotorblatt (2)
- Rotorblätter (2)
- Röntgenverfahren (2)
- Sandwich (2)
- Schallemissionsprüfung (2)
- Schubrahmen (2)
- Schädigungsmechanismen (2)
- Shear strength and stiffness (2)
- Temperature (2)
- Thermoplastic (2)
- Thermoset polymers (2)
- Air-coupled ultrasonic testing (1)
- Airborne ultrasonic testing (1)
- Aircraft (1)
- Alterung (1)
- Automotive (1)
- Biaxial loading (1)
- Buckling (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Fibers (1)
- Carbon fiber reinforced polymer (CFRP) (1)
- Carbon fibre reinforced plastics (1)
- Carbon fibre reinforced plastics (CFRP) (1)
- Carbon fibre reinforced plastics CFRP (1)
- Carbon fibre-reinforced-plastics (1)
- Carbon fibres (1)
- Carbon-fibre-reinforced (1)
- Carbon-fibre-reinforced plastics (1)
- Certification Standard 22 (1)
- Composite structures (1)
- Composite testing (1)
- Core materials (1)
- Crack evolution (1)
- Crack growth (1)
- DSC (1)
- Damage (1)
- Damage accumulation (1)
- Damage identification (1)
- Damage onset (1)
- Damage state (1)
- Damage state of CFRP (1)
- Data analysis (1)
- Data management (1)
- Design verification (1)
- Differential scanning calorimetry (DSC) (1)
- Diffraction Enhanced Imaging (1)
- Distributed fiber optic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed fibre optic sensors (1)
- Druckbehälterprüfung (1)
- EASA (1)
- Embedded sensors (1)
- Epoxid-Harz (1)
- Epoxy resins (1)
- Erneuerbare Energien (1)
- Failure mechanisms (1)
- Faser-Bragg-Gitter-Sensoren (1)
- Faserkunstoffverbund (1)
- Fatigue Life Evaluation (1)
- Fatigue Testing (1)
- Fatigue tests (1)
- Ferroelectret (1)
- Ferroelektret (1)
- Fiber reinforced plastics (1)
- Fiber reinforced polymer (1)
- Fibre bragg grating sensors (1)
- Fibre orientation (1)
- Fibre reinforced plastics (1)
- Fire resistance (1)
- Fire testing (1)
- Four point bending test (1)
- Four-point bending test (1)
- GFRP (1)
- General Aviation (1)
- Glasfaserverstärkter Kunststoff (1)
- Glass fiber reinforced polymer (1)
- Glass fiber-epoxy composites (1)
- Glass fibre reinforced plastics (1)
- Glass fibre reinforced plastics (GFRP) (1)
- Glass-fibre-reinforced plastics (1)
- Grey scale value analysis (1)
- In situ near-infrared (NIR) spectroscopy (1)
- In situ tensile test (1)
- Integrated monitoring system (1)
- Inter- and intralaminar fatigue (1)
- Intermediate-scale test method (1)
- Joints/joining (1)
- Klebung (1)
- Kurzfaser-verstärkte Thermoplaste (1)
- Laminographie (1)
- Laminography (1)
- Lightweight materials (1)
- Lightweighting (1)
- Limit values (1)
- Load identification (1)
- Material degradation (1)
- Materialmodell (1)
- Matrixschädigung (1)
- Mechanical testing (1)
- Micro cracking (1)
- Modalanalyse (1)
- Near-infrared spectroscopy (1)
- New standards (1)
- Normung (1)
- Offshore wind turbines (1)
- Optical backscatter reflectometry (1)
- Optical fibre (1)
- PA-GF30 (1)
- Photon counting detector (1)
- Polymer–matrix composites (1)
- Post-crash scenario (1)
- Pultruded fiber rods (1)
- Push-out Test (1)
- Recycling (1)
- Repair of sandwich shell structures (1)
- Repair patch (1)
- Reparatur (1)
- Residual stresses (1)
- Rissentwicklung (1)
- Risszähigkeit (1)
- Rohrprobekörper (1)
- Rotor blades (1)
- Rotorblattschalen (1)
- Röntgen-Refraktion (1)
- Röntgenstreuung (1)
- Sailplane Development Panel (1)
- Scarf joint (1)
- Scarf repairs (1)
- Schalenprüfstand (1)
- Schallemissionsmessung (1)
- Schubeigenschaften (1)
- Schubfestigkeit (1)
- Schädigungsverhalten (1)
- Short fiber reinforced composites (1)
- Short fiber reinforced plastics (1)
- Short fibre composites (1)
- Short fibre reinforced composites (1)
- Short-Fibre-Reinforced Polymadide (1)
- Smart materials (1)
- Structural assessment (1)
- Structural composites (1)
- Structural health monitoring (1)
- Structural health monitoring (SHM) (1)
- Structural integrity (1)
- Structural integrity investigation (1)
- Surface treatments (1)
- Swept wavelength interferometry (1)
- Swept wavelength interferometry (SWI) (1)
- Synchrotronstrahlung (1)
- Test blade (1)
- Thermo mechanical fatigue (1)
- Thermo-mechanical-loading (1)
- Thermo-mechanics (1)
- Thermographie (1)
- Thermomechanical properties (1)
- Transducers (1)
- Very high cycle fatigue (1)
- Very high cycle fatigue (VHCF) (1)
- WAXS technique (1)
- Wandler (1)
- Werkstoffprüfung (1)
- Wind energy (1)
- Wind turbine (1)
- Windkraft (1)
- X-ray (1)
- X-ray computed tomography (1)
- X-ray laminography (1)
- X-ray refractography (1)
- Zerstörungsfreie Prüfung (1)
- ZfP mit Röntgenverfahren (1)
- Zug-Druck-Schubprüfung (1)
- Zustandsüberwachung (1)
- composite (1)
- fire resistance (1)
- fire stability (1)
- grating (1)
- intermediate-scale testing (1)
- multi scale testing (1)
- refraction (1)
- sandwich panels (1)
- shells (1)
- thermomechanische Beanspruchung (1)
- topography (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (41)
- 5.3 Polymere Verbundwerkstoffe (41)
- 8 Zerstörungsfreie Prüfung (12)
- 8.5 Röntgenbildgebung (5)
- 8.0 Abteilungsleitung und andere (4)
- 8.4 Akustische und elektromagnetische Verfahren (3)
- 7 Bauwerkssicherheit (2)
- 8.6 Faseroptische Sensorik (2)
- 4 Material und Umwelt (1)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (1)
Paper des Monats
- ja (1)
Eingeladener Vortrag
- nein (88)
Diese DIN SPEC legt ein Verfahren für die Prüfung von unverstärkten und partikel- und kurzfaserverstärkten Kunststoffen mittels Zug-Druck-Schubprüfung fest. Dieses Verfahren findet Anwendung zur Bestimmung der Schwingfestigkeit im Bereich von 103 bis 107 Schwingspielen und der Nachgiebigkeiten unter statischer Belastung sowie der Zugfestigkeit. Alle Beanspruchungen und berechneten Größen sind nennspannungs-basiert.
Grundsätzlich besteht bei Rohrprobekörpern auch die Möglichkeit eine Beanspruchung in Längs- und in Umfangsrichtung durch Innendruck zu erzeugen. Dies wird in dieser Spezifikation nicht berücksichtigt, um die Anwendung überschaubar zu halten. Bei Rohrproben mit ausgeprägter Querschnittsverkleinerung (z. B. der Prüfkörper Typ B), entsteht eine Umfangsspannung auch aufgrund einer Zugkraft (siehe Anhang C). Die Umfangsspannung muss dann mittels FEA lokal berechnet werden.
Das Verfahren gilt für rohrförmige Prüfkörper deren spezifische Form den Anforderungen der Werkstoff-prüfung und bei Kurzfaserverstärkung einer hohen Vorzugsausrichtung in Probenlängsrichtung genügen.
Diese DIN SPEC gilt nicht für endlosfaserverstärkte Kunststoffe. Wegen der vollkommen unterschiedlichen Fertigungstechnologien und der zu erwartenden hohen Prüflasten, sind hier die Anforderungen an die Prüfkörpergeometrie gesondert zu betrachten. Es wird nicht zielführend sein, beide Werkstoffklassen in einer Norm zu behandeln.
A new patented dynamic mechanical analysis (DMA) is presented, where the tensile, bending- or torsional stiffness of a media can be characterized in-situ during the phase transition from liquid to solid. An epoxy system, e.g. Hexion L285/H287, is filled into an elastomer container, such as a silicone tube. This can be mounted into a conventional OMA and, based on a linear viscoelastic approach, the storage modulus (E';G'), the loss modulus (E'';G'') and the loss angle tan(δ) can be measured at constant temperature as a function of time in order to investigate the liquid to sol-gel to solid transition. With this new method, the stiffness increase as a result of the cure process can be directly measured more precisely than with a rheometer in a shear plate set-up, because using an elastomer container gives a defined cross section for calculating the Young's modulus.
CFRP are more and more used in modern civil aircrafts hence the whole fuselage is made of this material (B787; A350). Due to strict certification Standards finally the normal in-service loading gives a low stress level compared to the static and even the fatigue strength of the material. Hence CFRP are assumed to have an infinite life. To evaluate this assumption, fatigue tests on CFRP-specimens were performed up to 108 load cycles. The first inter-fiber failure was evaluated non-destructively by the fatigue tests accompanying X-ray-refraction topography altemately and in-situ mechanical loading. The basic idea of the investigation is represented in fig. 1. At low load levels it could not be assumed the total failure of the samples. Hence accompanying non-destructive testing (NDT) is mandatory to get information about the damage state of the material.
A shell test bench was developed at BAM 5.3 which allows for static and fatigue testing of curved fiber-reinforced plastic (FRP) structures, during which in-situ the damage state can be non-destructively inspected by thermography and strain-field measurement techniques. Sandwich shell specimens with typical wind turbine blade manufacturing defects were designed and tested. The tested imperfections show a fairly significant reduction (up to 90%) of the shell test specimens‘ lifetime, depending on the type of imperfection. Using the in-situ NDT methods incorporated in the shell test bench, the location and cycle time of the initial defects and the damage evolution was investigated.
Sandwich-Schalenstrukturen in situ charakterisiert mit Thermographie und Felddehnungsmessungen
(2018)
An der BAM wurde ein Schalenprüfstand entwickelt, mit dem typische Sandwichschalenstrukturen unter simulierter Betriebsbeanspruchung belastet werden können. Im mechanischen Ermüdungsversuch wurden in situ die Entstehung von Schäden in Schalenprüfkörpern mit Test-Imperfektionen mittels der passiven Thermographie und Felddehnungsmessungen verfolgt. Damit konnten der Zeitpunkt, der Schadensursprung und der Schadensfortschritt zerstörungsfrei bestimmt werden. Zudem wurden vergleichend Schalenprüfkörper mit Luftultraschall und der Röntgen-Laminographie untersucht. Im Rahmen eines BMWi-Forschungsvorhabens wurden die Schädigungsmechanismen evaluiert und Empfehlungen für die Praxis der Fertigung von Rotorblättern abgeleitet. In diesem Beitrag wird sich auf die Darstellung der ZfP-Verfahren und der ZfP-Ergebnisse konzentriert.
Carbon Fibre Reinforced Plastics (CFRP) are more and more used in modern civil aircrafts. These days the whole fuselage is made of this material (B787; A350). Due to strict certification standards the normal in-service loading gives a low stress level compared to the static and even the fatigue strength of the material. Hence CFRP are assumed to have an infinite life. To evaluate this assumption, fatigue tests on CFRP-specimens were performed up to 108 load cycles and the first inter-fibre failure was evaluated non-destructively by accompanying Xray-refraction topography. A tensile testing machine was integrated in a small angle X-ray scattering (SAXS) setup. X-ray refraction topography was performed while the CFRP samples were tensile loaded. This non-destructive technique enables the detection of micro-cracking and inter-fibre failure especially for CFRP. For Glass Fibre Reinforced Plastic (GFRP) X-ray refraction and in-situ loading has already been successfully used. The increase of inner surfaces due to inter fibre failure was measured as a function of the stress state. Fatigue tests were performed at and below the limit of inter-fibre failure strength. State of the art is to assume the failure of the samples under cyclic loading as the fatigue life. Accompanying non-destructive X-ray refraction measurements reflects the damage state and enables to trace its evolution even if the total failure of the specimens does not occur. This investigation technique is of high interest to give the engineer a design value of infinite life which is practically often reached due to knock down factors of certification standards. Finally the infinite life was found for cyclic fatigue loaded CFRP-samples even under high inter fibre transverse and shear loading investigated up to 108 load cycles.
Lightweighting as a cross-cutting technology contributes significantly to achieve the European Green Deal goals. Based on, but not limited to, advanced materials and production technologies, the demand for natural resources and CO2 emmissions are reduced by lightweighting during production, as well as use phase. Therefore, lightweighting is a crucial transformation technology assisting in decoupling economic growth from resource consumption. In this manner, lightweighting contributes significantly as a key technology of relevance for many industrial sectors such as energy, mobility, and infrastructure, towards resource efficiency, climate action and economic strength, as well as a resilient Europe. To strengthen international partnerships, addressing global issues of today at the edge of science with high performance lightweight material based on carbon fibers, an overview about the BAM expertise in carbon fiber reinforced materials is given.
Moderne Leichtbaustrukturen (Luftfahrt, Eisenbahn, Automotive) aus Faserverbundwerkstoffen (FVW) sind hohen mechanischen und klimatischen Beanspruchungen ausgesetzt. Aussagen über die Lebensdauer und Funktionssicherheit der FVW-Bauteile können eher aus Untersuchungen der mikromechanischen Eigenschaften gewonnen werden als aus der globalen Festigkeit. Die Röntgenrefraktionstopografie ist ein Verfahren zur zerstörungsfreien Bestimmung von inneren Oberflächen in Werkstoffen. Angewendet auf FVW lassen sich Aussagen über die Faserorientierungen, die Fertigungsqualität sowie über Faser-Matrix-Ablösungen und Matrixrisse infolge mechanischer Beanspruchung gewinnen. Nachfolgend wird ein neues Verfahren zur Bestimmung des Zwischenfaserbruchversagens am komplexen Laminat vorgestellt. Hierbei wird das Röntgenrefraktionsverfahren "online bei Zug-Belastung der Probe angewendet.
Proben mit einer Mittelkerbe aus Polyamid 66 mit 35% Gewichtsan-teil an Kurzglasfaser (PA-GF35) wurden im Spritzgießverfahren hergestellt und in einem ungeschädigten und durch Schwingbeanspruch geschädigten Zustand mittels Röntgenverfahren charakterisiert. Sowohl die Faserorientierungsverteilung als auch die Riss-/Mikrorissbildung wurden mit der Röntgenrefraktionstopographie in einem SAXS-Aufbau und dem Diffraction-Enhanced-Imaging am Synchrotron (BESSY II) analysiert. Beide Verfahren spiegeln in guter Übereinstimmung die Charakteristiken dieser Werkstoffklasse in Bezug auf die Fertigungsqualität und die Schädigungsme-chanismen wider.