Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-647584

Effect of sintering temperature on structural, microstructural, and dielectric properties of (Co0.2Fe0.2Ni0.2Al0.2Ti0.2)3O4 multi-cations high entropy oxides

  • The study reports the effect of sintering temperature on structural, microstructural, and dielectric properties of (Co0.2Fe0.2Ni0.2Al0.2Ti0.2)3O4 spinel high-entropy oxides (HEOs) synthesized through the solid-state mechanochemistry method. The sintering of the ceramic powders was accomplished at three different temperatures (1000 ◦C, 1100 ◦C, and 1250 ◦C), followed by air quenching. XRD analysis along with Le-Bail refinement confirms that 1100 ◦C and 1250 ◦C sintered oxides comprised of a single cubic spinel phase (Fd3m), while 1000 ◦C sintered oxide contains constituent oxides and a spinel phase. The phase formation of oxides sintered at 1100 ◦C and 1250 ◦C has also been confirmed by Raman spectroscopic analysis. Microstructural analysis revealed that the aggregated particle size increases with the rise in sintering temperature. With the change in sintering temperature, the dielectric behavior of the ceramic changed extensively. The 1100 ◦C sintered ceramic exhibits highThe study reports the effect of sintering temperature on structural, microstructural, and dielectric properties of (Co0.2Fe0.2Ni0.2Al0.2Ti0.2)3O4 spinel high-entropy oxides (HEOs) synthesized through the solid-state mechanochemistry method. The sintering of the ceramic powders was accomplished at three different temperatures (1000 ◦C, 1100 ◦C, and 1250 ◦C), followed by air quenching. XRD analysis along with Le-Bail refinement confirms that 1100 ◦C and 1250 ◦C sintered oxides comprised of a single cubic spinel phase (Fd3m), while 1000 ◦C sintered oxide contains constituent oxides and a spinel phase. The phase formation of oxides sintered at 1100 ◦C and 1250 ◦C has also been confirmed by Raman spectroscopic analysis. Microstructural analysis revealed that the aggregated particle size increases with the rise in sintering temperature. With the change in sintering temperature, the dielectric behavior of the ceramic changed extensively. The 1100 ◦C sintered ceramic exhibits high frequency-dependent behavior, whereas the 1250 ◦C sintered ceramic yields low frequency-dependent behavior. The 1250 ◦C sintered HEO exhibits low-loss tangent (tan δ = 0.01) with higher dielectric permittivity (εʹ = 44) at high frequency (1 MHz) compared to the 1100 ◦C sintered ceramic and many other conventional dielectrics. Fractal concept and impedance analysis have been employed to correlate the microstructure-dielectric property relation of (Co0.2Fe0.2Ni0.2Al0.2Ti0.2)3O4 spinel HEOs. The found Hurst exponent values for both different temperature-sintered HEOs are less than 0.5, indicating the anti-persistent behavior. This signifies that the height variations at neighboring pixels are negatively correlated. The present work is of fundamental importance in employing fractal analysis for the first time on spinel HEOs and correlating their properties. It also shows that processing conditions can effectively tailor the dielectric properties of the materials.zeige mehrzeige weniger

Volltext Dateien herunterladen

Metadaten exportieren

Weitere Dienste

Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Rajesh K. MishraORCiD, F.B. MinussiORCiD, Priyanka KumariORCiD, Rohit R. Shahi, R.P. Yadav, Franziska EmmerlingORCiD, E.B. Araújo
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Ceramics International
Jahr der Erstveröffentlichung:2025
Organisationseinheit der BAM:6 Materialchemie
6 Materialchemie / 6.3 Strukturanalytik
Veröffentlichende Institution:Bundesanstalt für Materialforschung und -prüfung (BAM)
Verlag:Elsevier Ltd.
Jahrgang/Band:51
Ausgabe/Heft:27
Erste Seite:55341
Letzte Seite:55354
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:Fractal and impedance spectroscopic analysis; Mechanochemistry; Multi-cations high entropy oxide; Spinel structure
Themenfelder/Aktivitätsfelder der BAM:Material
Material / Materialdesign
DOI:10.1016/j.ceramint.2025.09.256
URN:urn:nbn:de:kobv:b43-647584
ISSN:0272-8842
Verfügbarkeit des Dokuments:Datei für die Öffentlichkeit verfügbar ("Open Access")
Lizenz (Deutsch):License LogoCreative Commons - CC BY - Namensnennung 4.0 International
Datum der Freischaltung:19.11.2025
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:19.11.2025
Schriftenreihen ohne Nummerierung:Wissenschaftliche Artikel der BAM
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.