Enhancement of the Fatigue Strength by Application of a Low Transformation Temperature Welding Consumable
- To improve the fatigue strength of weld seams, a project is being carried out at BAM using Low Transformation Temperature (LTT) welding consumables to reduce residual stress at weld seams. Longitudinal stiffeners, which were welded conventionally in the first layer and additionally with an LTT or conventional layer on the end faces, were tested for fatigue strength. The mean fatigue strength at 2 million load cycles was increased from 87 MPa to at least 156 MPa. A comparison of HFMI-treated samples with conventional filler metal showed an increase in fatigue strength of 146 MPa. This means that LTT filler metals achieve a similar increase in fatigue strength as conventional post-treatment methods.
| Autor*innen: | Martin HübnerORCiD |
|---|---|
| Koautor*innen: | Arne Kromm, Thomas Kannengiesser, Florian Dittmann, Igor Varfolomeev |
| Dokumenttyp: | Vortrag |
| Veröffentlichungsform: | Präsentation |
| Sprache: | Englisch |
| Jahr der Erstveröffentlichung: | 2025 |
| Organisationseinheit der BAM: | 9 Komponentensicherheit |
| 9 Komponentensicherheit / 9.4 Integrität von Schweißverbindungen | |
| DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Angewandte Physik |
| Freie Schlagwörter: | Fatigue strength; Low transformation temperature (LTT); Weld geometry |
| Themenfelder/Aktivitätsfelder der BAM: | Energie |
| Energie / Windenergie | |
| Veranstaltung: | The 78th IIW annual assembly and international conference on welding and joining |
| Veranstaltungsort: | Genua, Italy |
| Beginndatum der Veranstaltung: | 22.07.2025 |
| Enddatum der Veranstaltung: | 27.07.2025 |
| Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
| Datum der Freischaltung: | 16.07.2025 |
| Referierte Publikation: | Nein |
| Eingeladener Vortrag (wissenschaftliche Konferenzen): | Nein |

