Creep Behavior of Stainless Steel 316L Manufactured by Laser Powder Bed Fusion
- The broader industrial adoption of metal AM in safety-critical applications is limited, among others, by the still in-sufficient understanding of process–structure–property relationships and a lack of reliable mate-rial data. The content presented here approaches this limitation regarding the creep behavior of one of the most studied AM alloys: PBF-LB/M/316L stainless steel. A nearly as-built and a condition heat treated at 900 °C for 1 h, along with a conventionally manufactured variant are investigated. The creep behavior until reaching the minimum creep rate is mainly determined by the solidification cell structure. The damage is overall mainly intergranular, independent of the heat treated condition. The heat treatment at 900 °C for 1 h partially influenced the microstructure (mainly in terms of cell
structure). The creep behavior until reaching the minimum creep rate remained nearly unchanged. The creep lifetime and ductility were enhanced. The crystallographic texture evolvedThe broader industrial adoption of metal AM in safety-critical applications is limited, among others, by the still in-sufficient understanding of process–structure–property relationships and a lack of reliable mate-rial data. The content presented here approaches this limitation regarding the creep behavior of one of the most studied AM alloys: PBF-LB/M/316L stainless steel. A nearly as-built and a condition heat treated at 900 °C for 1 h, along with a conventionally manufactured variant are investigated. The creep behavior until reaching the minimum creep rate is mainly determined by the solidification cell structure. The damage is overall mainly intergranular, independent of the heat treated condition. The heat treatment at 900 °C for 1 h partially influenced the microstructure (mainly in terms of cell
structure). The creep behavior until reaching the minimum creep rate remained nearly unchanged. The creep lifetime and ductility were enhanced. The crystallographic texture evolved after creep deformation.…


| Autor*innen: | Luis Ávila CalderónORCiD |
|---|---|
| Koautor*innen: | Alexander Ulbricht, Leonardo Agudo JácomeORCiD, Birgit RehmerORCiD, Birgit SkrotzkiORCiD, Alexander Evans |
| Dokumenttyp: | Vortrag |
| Veröffentlichungsform: | Präsentation |
| Sprache: | Englisch |
| Jahr der Erstveröffentlichung: | 2025 |
| Organisationseinheit der BAM: | 5 Werkstofftechnik |
| 5 Werkstofftechnik / 5.1 Mikrostruktur Design und Degradation | |
| 5 Werkstofftechnik / 5.2 Metallische Hochtemperaturwerkstoffe | |
| 8 Zerstörungsfreie Prüfung | |
| 8 Zerstörungsfreie Prüfung / 8.5 Röntgenbildgebung | |
| DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
| Freie Schlagwörter: | AGIL 316L; Creep; Microstructure |
| Themenfelder/Aktivitätsfelder der BAM: | Material |
| Material / Additive Fertigung | |
| Veranstaltung: | TMS 2025 Annual Meeting & Exhibition |
| Veranstaltungsort: | Las Vegas, NV, USA |
| Beginndatum der Veranstaltung: | 23.03.2025 |
| Enddatum der Veranstaltung: | 27.03.2025 |
| Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
| Datum der Freischaltung: | 24.06.2025 |
| Referierte Publikation: | Nein |
| Eingeladener Vortrag (wissenschaftliche Konferenzen): | Nein |

