Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-630453

Regularization of softening plasticity models for explicit dynamics using a gradient-enhanced modified Johnson–Holmquist model

  • The behavior of concrete under high strain rates is often described by plasticity models with softening, which is modeled by a reduction of the yield surface as a function of the local equivalent plastic strain. Many of these models are local and therefore produce mesh-dependent results. In this contribution, the gradient-enhancement of such models is investigated to mitigate the mesh-dependency. First, the mesh-dependency of these local formulations based on the analysis with a modified JH2 model as a representative for these constitutive formulations is demonstrated using a one-dimensional benchmark example. In the benchmark, the width of the damaged zone decreases upon mesh-refinement and the dissipated plastic energy tends to zero. It is further shown that a significantly small safety factor for the critical time step is needed in order to achieve accurate results for the benchmark example. The first investigated gradient-enhancement approach replaces the equivalent local plasticThe behavior of concrete under high strain rates is often described by plasticity models with softening, which is modeled by a reduction of the yield surface as a function of the local equivalent plastic strain. Many of these models are local and therefore produce mesh-dependent results. In this contribution, the gradient-enhancement of such models is investigated to mitigate the mesh-dependency. First, the mesh-dependency of these local formulations based on the analysis with a modified JH2 model as a representative for these constitutive formulations is demonstrated using a one-dimensional benchmark example. In the benchmark, the width of the damaged zone decreases upon mesh-refinement and the dissipated plastic energy tends to zero. It is further shown that a significantly small safety factor for the critical time step is needed in order to achieve accurate results for the benchmark example. The first investigated gradient-enhancement approach replaces the equivalent local plastic strain with its nonlocal counterpart. The enhancement is based on the inclusion of inertia and damping to the additional Helmholtz equation which enables the use of the central difference method as an explicit solver. This method successfully distributes the damage over several elements, however, the local equivalent plastic strain still localizes into one cell. The inclusion of hardening with respect to the local equivalent plastic strain inhibits the localization and the dissipated plastic energy converges with mesh-refinement. This is further confirmed in a two-dimensional wedge-splitting experiment and a four-point bending test where the damage pattern produced by the local model is mesh-dependent as well and the dissipated plastic energy tends to zero with mesh-refinement. The proposed nonlocal model with hardening results in a consistent damage pattern and the dissipated plastic energy converges. Furthermore, the nonlocal model with hardening is less sensitive to time step refinement, such that computational efficiency can be improved compared to the local model. The numerical experiments are implemented using the free open source tool FEniCSx and have been made available on Zenodo.zeige mehrzeige weniger

Metadaten exportieren

Weitere Dienste

Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Sjard Mathis RosenbuschORCiD, D. BalzaniORCiD, Jörg F. UngerORCiD
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):International Journal of Impact Engineering
Jahr der Erstveröffentlichung:2024
Organisationseinheit der BAM:7 Bauwerkssicherheit
7 Bauwerkssicherheit / 7.7 Modellierung und Simulation
Veröffentlichende Institution:Bundesanstalt für Materialforschung und -prüfung (BAM)
Verlag:Elsevier Ltd.
Verlagsort:Schweiz
Jahrgang/Band:198
Aufsatznummer:105209
Erste Seite:1
Letzte Seite:18
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurbau
Freie Schlagwörter:Concrete modeling; Explicit dynamics; FEniCS; Gradient plasticity; JH2 model; Mesh convergence; Time step convergence
Themenfelder/Aktivitätsfelder der BAM:Infrastruktur
Infrastruktur / Green Intelligent Building
DOI:10.1016/j.ijimpeng.2024.105209
URN:urn:nbn:de:kobv:b43-630453
ISSN:1879-3509
Verfügbarkeit des Dokuments:Datei für die Öffentlichkeit verfügbar ("Open Access")
Lizenz (Deutsch):License LogoCreative Commons - CC BY - Namensnennung 4.0 International
Datum der Freischaltung:07.05.2025
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:07.05.2025
Schriftenreihen ohne Nummerierung:Wissenschaftliche Artikel der BAM
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.