High temperature oxidation of the CrFeNi medium entropy alloy
- The oxidation behaviour of any alloy is a key issue which determines whether this material is suited for application. In this study, a single-phase equiatomic CrFeNi alloy was exposed to synthetic air at 1000 - 1100 °C for 24 - 1000 h and compared to 316L steel. The oxidation rate of CrFeNi was parabolic at the lower temperatures 1000 °C and 1050 °C, but at 1100 °C a first breakaway occurred after 4 h of exposure. In all cases, the oxide scales were found to partially spall off. As expected, Cr diffuses outwards to form a Cr2O3 layer at the gas/oxide interface. A thin layer of (Cr, Fe, Ni)3O4 is identified at the oxide/alloy interface. The CrFeNi alloy does not show any catastrophic oxidation behaviour at the investigated conditions unlike the 316L alloy, which contains more Mn and Fe.
| Autor*innen: | Anna Maria ManzoniORCiD |
|---|---|
| Koautor*innen: | W. Mohring, M. Schneider, G. Laplanche, S. P. Hagen, C. Stephan-ScherbORCiD |
| Dokumenttyp: | Vortrag |
| Veröffentlichungsform: | Präsentation |
| Sprache: | Englisch |
| Jahr der Erstveröffentlichung: | 2024 |
| Organisationseinheit der BAM: | 5 Werkstofftechnik |
| 5 Werkstofftechnik / 5.1 Mikrostruktur Design und Degradation | |
| DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
| Freie Schlagwörter: | Corrosion; Medium entropy alloy; Scanning electron microscopy |
| Themenfelder/Aktivitätsfelder der BAM: | Material |
| Material / Degradationsmechanismen | |
| Veranstaltung: | MSE 2024 |
| Veranstaltungsort: | Darmstadt, Germany |
| Beginndatum der Veranstaltung: | 24.08.2024 |
| Enddatum der Veranstaltung: | 26.08.2024 |
| Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
| Datum der Freischaltung: | 20.01.2025 |
| Referierte Publikation: | Nein |
| Eingeladener Vortrag (wissenschaftliche Konferenzen): | Nein |

