Decontamination of biocidal loaded wooden artworks by means of laser and plasma processing

  • Many wooden artworks are contaminated by DDT (dichlorodiphenyltrichloroethane) as a result of a surface treatment by means of Hylotox-59©. The liquid preservative was used until the end of the 80s. DDT crystal structures are formed on the wood surfaces by the "blooming" of chlorine compounds. Contaminated waste wood with natural biocide ageing, gilded and wood carved elements of an old picture frame and wooden samples with paint layers were provided by the Schlossmuseum Sondershausen. The removal of DDT was evaluated employing femtosecond and nanosecond laser radiation and cold atmospheric plasma technique using different working gases (air, nitrogen, and argon). Before laser application, a chlorine measurement is done by X-ray fluorescence (XRF) analysis as reference. After laser processing, the XRF analysis is used again at the same surface position to determine depletion rates. Additionally, a documentation and characterization of the sample surface is done before and afterMany wooden artworks are contaminated by DDT (dichlorodiphenyltrichloroethane) as a result of a surface treatment by means of Hylotox-59©. The liquid preservative was used until the end of the 80s. DDT crystal structures are formed on the wood surfaces by the "blooming" of chlorine compounds. Contaminated waste wood with natural biocide ageing, gilded and wood carved elements of an old picture frame and wooden samples with paint layers were provided by the Schlossmuseum Sondershausen. The removal of DDT was evaluated employing femtosecond and nanosecond laser radiation and cold atmospheric plasma technique using different working gases (air, nitrogen, and argon). Before laser application, a chlorine measurement is done by X-ray fluorescence (XRF) analysis as reference. After laser processing, the XRF analysis is used again at the same surface position to determine depletion rates. Additionally, a documentation and characterization of the sample surface is done before and after laser and plasma treatment using optical microscopy. For plasma processing with various systems a chlorine measurement is done by gas chromatographic-mass spectrometry (GCMS) analysis. For laser treatment a depletion of the chlorine concentration of 55-70% and 75% was achieved for 1064-nm nanosecond pulses and 800-nm femtosecond pulses, respectively. For the application of 30-fs laser pulses, no crystalline DDT residues remain on the sample surfaces. This holds also for the plasma processing with nitrogen as working gas.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • LACONA.XI._VORTRAG-Schmidt_Krakow.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Birgit Angelika Schmidt
Koautor*innen:Simone Pentzien, Andrea Conradi, Jörg Krüger, Constanze Roth, Oliver Beier, Annett Hartmann, Bernd Grünler
Dokumenttyp:Vortrag
Veröffentlichungsform:Präsentation
Sprache:Englisch
Jahr der Erstveröffentlichung:2016
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Sanitär- und Kommunaltechnik; Umwelttechnik
Freie Schlagwörter:DDT; Decontamination; Laser cleaning; Plasma treatment; Wood
Veranstaltung:Conference on Lasers in the Conservation of Artworks (LACONA XI)
Veranstaltungsort:Krakow, Poland
Beginndatum der Veranstaltung:19.09.2016
Enddatum der Veranstaltung:23.09.2016
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:09.01.2017
Referierte Publikation:Nein
Eingeladener Vortrag:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.