On the influence of some test parameters on the results of oscillating sliding tests

  • The friction and wear behaviour of materials is often characterised in laboratory tests using a simple ball-on-flat configuration. From this type of test can be derived information useful in guiding the development of tribomaterials and in helping select candidate materials for specific applications. A large variety of tribotesting methods exists, and indeed several are not yet standardised. One of these methods is the oscillating sliding test, where a ball moves in relation to a disc, usually with small strokes. This method is almost non-destructive and can be applied to very small specimens. One of the most important parameters in laboratory tests is the humidity of the surrounding air. Experimental results on the friction and wear characteristics of different ceramics tested against different ball materials at room temperature in oscillating sliding contact are presented here and discussed, taking into account the effects of the test duration, relative humidity, and counterbodyThe friction and wear behaviour of materials is often characterised in laboratory tests using a simple ball-on-flat configuration. From this type of test can be derived information useful in guiding the development of tribomaterials and in helping select candidate materials for specific applications. A large variety of tribotesting methods exists, and indeed several are not yet standardised. One of these methods is the oscillating sliding test, where a ball moves in relation to a disc, usually with small strokes. This method is almost non-destructive and can be applied to very small specimens. One of the most important parameters in laboratory tests is the humidity of the surrounding air. Experimental results on the friction and wear characteristics of different ceramics tested against different ball materials at room temperature in oscillating sliding contact are presented here and discussed, taking into account the effects of the test duration, relative humidity, and counterbody material.zeige mehrzeige weniger

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Dieter Klaffke
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):TriboTest
Jahr der Erstveröffentlichung:1999
Verlag:Coppin
Verlagsort:Deal
Jahrgang/Band:6-1
Erste Seite:29
Letzte Seite:49
Freie Schlagwörter:Ceramics; Counterbody material; Feuchte; Oscillating Sliding; Reibung; Testdauer; Verschleiß
DOI:10.1002/tt.3020060104
ISSN:1354-4063
ISSN:1557-685X
Verfügbarkeit des Dokuments:Weder Datei noch physisches Exemplar vorhanden ("No Access")
Datum der Freischaltung:19.02.2016
Referierte Publikation:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.