• Treffer 5 von 5780
Zurück zur Trefferliste

Formation of Creep Damage of 316L Produced by Laser Powder Bed Fusion

  • The damage mechanisms of metallic components produced by process laser powder bed fusion differ significantly from those typically observed in conventionally manufactured variants of the same alloy. This is due to the unique microstructures of additively manufactured materials. Herein, the focus is on the study of the evolution of creep damage in stainless steel 316L specimens produced by laser powder bed fusion. X-ray computed tomography is used to unravel the influence of the process-specific microstructure from the influence of the initial void distribution on creep damage mechanisms. The void distribution of two specimens tested at 600 °C and 650 °C is analyzed before a creep test, after an interruption, and after fracture. The results indicate that the formation of damage is not connected to the initial void distribution. Instead, damage accumulation at grain boundaries resulting from intergranular cracking is observed.

Volltext Dateien herunterladen

  • Formation of Creep Damage of 316L produced by PBF-LB.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Alexander UlbrichtORCiD
Koautor*innen:Luis Alexander Ávila Calderón, Konstantin Sommer, Gunther Mohr, Alexander Evans, Birgit Skrotzki, Giovanni Bruno
Dokumenttyp:Vortrag
Veröffentlichungsform:Präsentation
Sprache:Englisch
Jahr der Erstveröffentlichung:2024
Organisationseinheit der BAM:5 Werkstofftechnik / 5.1 Mikrostruktur Design und Degradation
5 Werkstofftechnik / 5.2 Metallische Hochtemperaturwerkstoffe
8 Zerstörungsfreie Prüfung / 8.5 Röntgenbildgebung
9 Komponentensicherheit / 9.6 Additive Fertigung metallischer Komponenten
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:AISI 316L; Additive Manufacturing; Computed Tomography; Creep; Laser Powder Bed Fusion; Microstructure; PBF-LB/M/316L
Themenfelder/Aktivitätsfelder der BAM:Material / Additive Fertigung
Material / Degradation von Werkstoffen
Veranstaltung:4th Symposium on Materials and Additive Manufacturing - Additive 2024
Veranstaltungsort:Berlin, Germany
Beginndatum der Veranstaltung:12.06.2024
Enddatum der Veranstaltung:14.06.2024
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:18.06.2024
Referierte Publikation:Nein
Eingeladener Vortrag:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.