Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-563731
Improvement of Charpy impact toughness by using an AC magnet backing system for laser hybrid welding of thick S690QL steels
- The study deals with the influence of the heat input and the resulting cooling times on the microstructure and Charpy impact toughness of single-pass laser hybrid welded 20-mm thick high-strength steel S690QL. The main focus is on the change of the mechanical properties over the entire seam thickness. The cooling times were measured in-situ using a pyrometer and an optical fibre in three different depths of the seam where Charpy impact test specimens were also later taken. Thereby, three different heat inputs from 1.3 kJ/mm to 2 kJ/mm were investigated. Despite the observed decreased values of both t8/5-cooling time and the Charpy impact toughness in the root part of the seam, the required impact toughness of 38 J/cm2 could be reached in dependance on applied heat input, especially at the heat input of 1.6 kJ/mm.
Autor*innen: | Ömer Üstündag, Nasim Bakir, Andrey GumenyukORCiD, Michael RethmeierORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Procedia CIRP |
Jahr der Erstveröffentlichung: | 2022 |
Organisationseinheit der BAM: | 9 Komponentensicherheit |
9 Komponentensicherheit / 9.3 Schweißtechnische Fertigungsverfahren | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | Elsevier B.V. |
Jahrgang/Band: | 111 |
Erste Seite: | 462 |
Letzte Seite: | 465 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Charpy impact toughness; Electromagnetic backing; Laser hybrid welding; Thermal cycles; Thick-plate welding |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Veranstaltung: | 12th CIRP conference on photonic technologies [lane 2022] |
Veranstaltungsort: | Fürth, Germany |
Beginndatum der Veranstaltung: | 04.09.2022 |
Enddatum der Veranstaltung: | 08.09.2022 |
DOI: | 10.1016/j.procir.2022.08.067 |
URN: | urn:nbn:de:kobv:b43-563731 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY-NC-ND - Namensnennung - Nicht kommerziell - Keine Bearbeitungen 4.0 International |
Datum der Freischaltung: | 24.11.2022 |
Referierte Publikation: | Nein |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |