Effect of interpass temperature on residual stresses in LTT welded joints
- Independent from the interpasstemperature residual stresses in longitudinal direction were lower than in transverse direction. This applies for the surface as well as for the bulk of the welds. -Residual stresses in the bulk were in general lower compared to stresses found on the surface. •Compressive residual stresses as a result of the martensite formation were formed in the bulk weld metal, only. •Independent from the LTT filler used high interpasstemperatures were beneficial to reduce the stresses mainly in longitudinal direction. •Lower interpasstemperatures tend to narrow the tensile zone in the weld metal but they also prevent the formation of compressive residual stresses.
Autor*innen: | Jonny Dixneit |
---|---|
Weitere Person: | Arne KrommORCiD, M. Boin, Thomas KannengießerORCiD, J. Gibmeier |
Dokumenttyp: | Vortrag |
Veröffentlichungsform: | Präsentation |
Sprache: | Englisch |
Jahr der Erstveröffentlichung: | 2016 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Interpass temperature; LTT; Phase transformation; Residual stress; Welding |
Veranstaltung: | IIW2016 |
Veranstaltungsort: | Melbourne, Australia |
Beginndatum der Veranstaltung: | 10.07.2016 |
Enddatum der Veranstaltung: | 16.07.2016 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 09.09.2016 |
Referierte Publikation: | Nein |
Eingeladener Vortrag: | Nein |