Hybrid laser arc welding of thick plates X8Ni9 for LNG tank construction
- Results of experimental investigations of the relationship between laser-hybrid welding process parameters, type of the filler metal and the mechanical properties of the welds made from 9% nickel cryogenic steel X8Ni9 are discussed. The results contribute to the development and conversion in the industrial practice a new laser beam-based welding technology for the automated manufacturing of LNG tanks. The remarkable heterogeneity in the chemical composition of the weld metal as well as an insufficient impact toughness could be indicated by using austenitic filler wire. The most promising results were achieved by applying 11%Ni filler wire, which is similar to the base material. A correlation between impact toughness and wire feeding speed could be shown. The highest impact toughness was 134 J at -196°C. The laser-hybrid welds passed the tensile test. The failure stress of 720 MPa with a fracture location in the base metal was achieved for all samples tested.
Autor*innen: | S. Gook, A. El-Batahgy, Andrey GumenyukORCiD, Michael RethmeierORCiD |
---|---|
Dokumenttyp: | Beitrag zu einem Tagungsband |
Veröffentlichungsform: | Graue Literatur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Lasers in Manufacturing Conference 2019 |
Jahr der Erstveröffentlichung: | 2019 |
Organisationseinheit der BAM: | 9 Komponentensicherheit |
9 Komponentensicherheit / 9.3 Schweißtechnische Fertigungsverfahren | |
Verlag: | WLT Wissenschaftliche Gesellschaft Lasertechnik e.V. |
Erste Seite: | 1 |
Letzte Seite: | 11 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Cryogenic Steel; Hybrid Laser Arc Welding; Low Temperature Toughness; X8Ni9 |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Veranstaltung: | Lasers in Manufacturing Conference 2019 |
Veranstaltungsort: | Munich, Germany |
Beginndatum der Veranstaltung: | 24.06.2019 |
Enddatum der Veranstaltung: | 27.06.2019 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 18.09.2019 |
Referierte Publikation: | Nein |