Das Suchergebnis hat sich seit Ihrer Suchanfrage verändert. Eventuell werden Dokumente in anderer Reihenfolge angezeigt.
  • Treffer 3448 von 7658
Zurück zur Trefferliste
Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-1310

Trial Design for Testing and Evaluation in Humanitarian Mine Clearance

  • This thesis proposes a design of experiment for testing and evaluation of the equipment and the methods used in manual mine clearance. The thesis is based on several metal detector trials and a trial of manual demining methods. The core of this dissertation comprises four metal detector trials performed in Germany and Croatian in 2003 and 2005. The purpose of these trials was to investigate the feasibility of the tests described in the CWA (Comité Européende Normalisation/CEN/Workshop Agreement) 14747:2003, the standard for testing metal detectors for humanitarian demining. The goals of the trials were: to find an appropriate design of experiment for testing metal detectors; to establish the use of ROC diagrams (Receiver Operating Characteristics) and POD curves (Probability of Detection) in the analysis of the experimental results; and to gain practical experience in organising and conducting metal detector trials. Apart of this thesis is devoted to a trial of manual demining methodsThis thesis proposes a design of experiment for testing and evaluation of the equipment and the methods used in manual mine clearance. The thesis is based on several metal detector trials and a trial of manual demining methods. The core of this dissertation comprises four metal detector trials performed in Germany and Croatian in 2003 and 2005. The purpose of these trials was to investigate the feasibility of the tests described in the CWA (Comité Européende Normalisation/CEN/Workshop Agreement) 14747:2003, the standard for testing metal detectors for humanitarian demining. The goals of the trials were: to find an appropriate design of experiment for testing metal detectors; to establish the use of ROC diagrams (Receiver Operating Characteristics) and POD curves (Probability of Detection) in the analysis of the experimental results; and to gain practical experience in organising and conducting metal detector trials. Apart of this thesis is devoted to a trial of manual demining methods performed in Mozambique in 2004. The main goal of that trial was to compare the speed of various manual demining methods, including the most common excavation methods. The outcome of this work is the proposals and recommendations for an update of the standard for testing metal detectors CWA 14747:2003. Maximum detection height measurements were performed as a part of the metal detector trial carried out in Croatiain2005. The results reveal a high variability of the maximum detection height. This high variability needs to be taken into account in all experiments. Apart of the variability is caused by the differences between the operators and by the setup of the metal detector. It is therefore recommended that two kinds of experiments with the maximum detection height as a response variable are defined in the next update of CWA 14747:2003. The first kind should include the setup, the soil and the operator as factors in the design of experiment. The in-soil measurements with the same detector should be performed with repeated setups and with several operators. The second kind of experiments should be experiments evaluating the influence of other predictor variables. In those experiments, it is recommended to perform one-factor or multiple-factor in-air measurements with the operators and the setup as a block. The main part of the metal detector trials described in this thesis was the detection reliability tests. Detection reliability tests as described in CWA14747:2003 come closest to representing the real field conditions in demining. They include many environmental influences and, most importantly, many of the human factor influences. However, each test design is a compromise between fully representative conditions and cost effectiveness. In this thesis, a fractional factorial design based on the Graeco-Latin square is proposed as a solution to the experimental problem. The results are reported in the form of ROC diagrams and POD curves. The crossover design enables each operator to work with fewer detector models with in a certain time. The variations of the design enabled an unbiased comparison of detectors in each soil and with each target model separately. It is recommended that the solutions proposed in this thesis be incorporated in the standard CWA14747:2003. It has been shown that maximum detection heights measurements provide the information about the best possible performance of a metal detector in are liability test.zeige mehrzeige weniger

Volltext Dateien herunterladen

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Mate Gaal
Dokumenttyp:Dissertation
Veröffentlichungsform:Eigenverlag BAM
Schriftenreihe (Bandnummer):BAM Dissertationsreihe (27)
Sprache:Englisch
Jahr der Erstveröffentlichung:2007
Veröffentlichende Institution:Bundesanstalt für Materialforschung und -prüfung (BAM)
Titel verleihende Institution:Brandenburgische Technische Universität Cottbus, Fakultät 3 für Maschinenbau, Elektrotechnik und Wirtschaftsingenieurwesen
Gutachter*innen:Wolfgang Spyra, Heinrich Heidt, Damir Markucic, P.-Th. Wilrich
Datum der Abschlussprüfung:06.07.2007
Verlag:Bundesanstalt für Materialforschung und -prüfung (BAM)
Verlagsort:Berlin
Jahrgang/Band:27
Erste Seite:1
Letzte Seite:158
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:Metalldetektor; Minenräumung
demining; metal detector
URN:urn:nbn:de:kobv:b43-1310
ISSN:1613-4249
ISBN:978-3-9811655-6-2
Verfügbarkeit des Dokuments:Datei für die Öffentlichkeit verfügbar ("Open Access")
Lizenz (Deutsch):License LogoAllgemeines Deutsches Urheberrecht
Datum der Freischaltung:23.01.2015
Referierte Publikation:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.