In-situ thermographic monitoring of the laser metal deposition process
- In this paper shortwave infrared (SWIR) thermographic measurements of the manufacturing of thin single-line walls via laser metal deposition (LMD) are presented. As the thermographic camera is mounted fixed to the welding arm, an acceleration sensor was used to assist in reconstructing the spatial position from the predefined welding path. Hereby we could obtain data sets containing the size of the molten pool and the oxide covered areas as functions of the position in the workpiece. Furthermore, the influence of the acquisition wavelength onto the thermograms was investigated in a spectral range from 1250 nm to 1550 nm. All wavelengths turned out to be usable for the in-situ process monitoring of the LMD process. The longer wavelengths are shown to be beneficial for the lower temperature range, while shorter wavelengths show more details within the molten pool.
Autor*innen: | Nils ScheuschnerORCiD, Simon AltenburgORCiD, Anne Straße, Andrey GumenyukORCiD, Christiane MaierhoferORCiD |
---|---|
Dokumenttyp: | Beitrag zu einem Tagungsband |
Veröffentlichungsform: | Graue Literatur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | II International Conference on Simulation for Additive Manufacturing - Sim-AM 2019 |
Jahr der Erstveröffentlichung: | 2019 |
Organisationseinheit der BAM: | 8 Zerstörungsfreie Prüfung |
8 Zerstörungsfreie Prüfung / 8.0 Abteilungsleitung und andere | |
9 Komponentensicherheit | |
9 Komponentensicherheit / 9.3 Schweißtechnische Fertigungsverfahren | |
Herausgeber (Institution): | International Centre for Numerical Methods in Engineering (CIMNE) |
Erste Seite: | 246 |
Letzte Seite: | 255 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | 3D Druck; Additive Fertigung; Laser Pulver Auftragsschweißen; Thermografie 3D printing; Additive manufacturing; Direct energy deposition; Laser Metal Deposition; Thermography |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Material / Additive Fertigung | |
Veranstaltung: | Sim-AM 2019 - 2. International Conference on Simulation for Additive Manufacturing |
Veranstaltungsort: | Pavia, Italy |
Beginndatum der Veranstaltung: | 11.09.2019 |
Enddatum der Veranstaltung: | 13.09.2019 |
URL: | http://congress.cimne.com/SIM-AM2019/frontal/Doc/proceedings.pdf |
ISBN: | 978-84-949194-8-0 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 24.09.2019 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 24.09.2020 |