In-situ monitoring of the laser powder bed fusion process by thermography, optical tomography and melt pool monitoring for defect detection
- For the wide acceptance of the use of additive manufacturing (AM), it is required to provide reliable testing methods to ensure the safety of the additively manufactured parts. A possible solution could be the deployment of in-situ monitoring during the build process. However, for laser powder bed fusion using metal powders (PBF-LB/M) only a few in-situ monitoring techniques are commercially available (optical tomography, melt pool monitoring), which have not been researched to an extent that allows to guarantee the adherence to strict quality and safety standards. In this contribution, we present results of a study of PBF-LB/M printed parts made of the nickel-based superalloy Haynes 282. The formation of defects was provoked by local variations of the process parameters and monitored by thermography, optical tomography and melt pool monitoring. Afterwards, the defects were characterized by computed tomography (CT) to identify the detection limits of the used in-situ techniques.
Autor*innen: | Nils ScheuschnerORCiD, F. Heinrichsdorff, Simon OsterORCiD, E. Uhlmann, J. Polte, A. Gordei, Kai HilgenbergORCiD |
---|---|
Dokumenttyp: | Beitrag zu einem Tagungsband |
Veröffentlichungsform: | Graue Literatur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Lasers in Manufacturing Conference 2023 |
Jahr der Erstveröffentlichung: | 2023 |
Organisationseinheit der BAM: | 8 Zerstörungsfreie Prüfung |
8 Zerstörungsfreie Prüfung / 8.0 Abteilungsleitung und andere | |
9 Komponentensicherheit | |
9 Komponentensicherheit / 9.6 Additive Fertigung metallischer Komponenten | |
Herausgeber (Institution): | Wissenschaftliche Gesellschaft Lasertechnik und Photonik e.V. |
Erste Seite: | 1 |
Letzte Seite: | 10 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Additive Manufacturing; Haynes 282; Laser powder bed fusion; Melt-pool-monitoring; Optical tomography; Thermography |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Material / Additive Fertigung | |
Veranstaltung: | Lasers in Manufacturing Conference 2023 |
Veranstaltungsort: | Munich, Germany |
Beginndatum der Veranstaltung: | 26.06.2023 |
Enddatum der Veranstaltung: | 29.06.2023 |
URL: | https://www.wlt.de/lim2023-proceedings/system-engineering-and-process-control |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 04.10.2023 |
Referierte Publikation: | Nein |