• Treffer 11 von 15
Zurück zur Trefferliste

High temperature in-vacuum flow-through sample holder (sandwich design version 1.1)

  • Technical drawings and documents for building a compact, heated, vacuum compatible flow-through sample holder. This holder is in use at the BAM MOUSE instrument as well as at the I22 beamline at the Diamond Light Source (see references for instrument details). This holder has several features: - The holder can be used in vacuum environments as well as in atmosphere - It has two G 1/4" UNF fittings to attach HPLC tubing for (optionally) flowing a medium through the sample cell - There are two additional (unflowed) sample positions for backgrounds and calibrants, held at the same temperature - The low-mass design coupled with a 250W heating element can achieve heating rates of 1 degree C per second, when coupled (for example) with an Omron E5CC PID controller. - The sample holder insert can be made from various materials depending on the application. Sealing the sample from the vacuum can be achieved using kapton, teflon or Magic tape, depending on the temperatureTechnical drawings and documents for building a compact, heated, vacuum compatible flow-through sample holder. This holder is in use at the BAM MOUSE instrument as well as at the I22 beamline at the Diamond Light Source (see references for instrument details). This holder has several features: - The holder can be used in vacuum environments as well as in atmosphere - It has two G 1/4" UNF fittings to attach HPLC tubing for (optionally) flowing a medium through the sample cell - There are two additional (unflowed) sample positions for backgrounds and calibrants, held at the same temperature - The low-mass design coupled with a 250W heating element can achieve heating rates of 1 degree C per second, when coupled (for example) with an Omron E5CC PID controller. - The sample holder insert can be made from various materials depending on the application. Sealing the sample from the vacuum can be achieved using kapton, teflon or Magic tape, depending on the temperature requirements. The inlet and outlet holes will need to be punctured with a needle to enable flow. - Large exit cones ensure a clear exit angle of at least 45 degrees two theta. - It has been tested with temperatures up to 400 degrees C. - Compression area has been raised and polished to ensure a good vacuum seal.zeige mehrzeige weniger

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Brian Richard PauwORCiD, Bettina RöderORCiD, Glen Jacob SmalesORCiD
Koautor*innen:Brian Richard Pauw
Dokumenttyp:Forschungsdatensatz
Veröffentlichungsform:Graue Literatur
Sprache:Englisch
Jahr der Erstveröffentlichung:2023
Organisationseinheit der BAM:6 Materialchemie
6 Materialchemie / 6.3 Strukturanalytik
6 Materialchemie / 6.5 Synthese und Streuverfahren nanostrukturierter Materialien
Herausgeber (Institution):Bundesanstalt für Materialforschung und -prüfung (BAM)
Verlag:Zenodo
Verlagsort:Geneva
DDC-Klassifikation:Naturwissenschaften und Mathematik / Chemie / Analytische Chemie
Freie Schlagwörter:Flow-through; Heated; SAXS; Sample cell; Sample holder; Vacuum compatible; WAXS; X-ray scattering; XRD
Themenfelder/Aktivitätsfelder der BAM:Chemie und Prozesstechnik
Art der Ressource:Physikalisches Objekt
Ort der Datenerhebung:Berlin, Germany
Beginndatum der Datenerstellung:01.01.2019
Enddatum der Datenerstellung:01.10.2022
DOI:10.5281/zenodo.7501030
Zugehöriger Identifikator:https://doi.org/10.1107/S1600577521002113
Zugehöriger Identifikator:https://doi.org/10.1088/1748-0221/16/06/P06034
Beschreibung der Datei(en) :Technical drawings, overview images, parts list and step files.
Verfügbarkeit des Dokuments:Datei für die Öffentlichkeit verfügbar ("Open Access")
Lizenz (Deutsch):License LogoCreative Commons - CC BY - Namensnennung 4.0 International
Datum der Freischaltung:03.01.2023
Referierte Publikation:Nein
Schriftenreihen ohne Nummerierung:Forschungsdatensätze der BAM
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.