Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-560012
Laser Welding of L-PBF AM components out of Inconel 718
- With regard to efficient production, it is desirable to combine the respective advantages of additively and conventionally manufactured components. Particularly in the case of large-volume components that also include filigree or complex structures, it makes sense to divide the overall part into individual elements, which afterwards have to be joined by welding. The following research represents a first step in fundamentally investigating and characterizing the joint welding of Laser Powder Bed Fusion (L-PBF) components made of Inconel 718. For this purpose, bead-on-plate welds were performed on plates manufactured using the L-PBF process and compared with the conventionally manufactured material. Conventional laser beam welding was used as welding process. The weld geometry was investigated as a function of the L-PBF build-up orientation. It was found that the welding depth and weld geometry differ depending on this orientation and in comparison to the conventional material.
Autor*innen: | C. Brunner-Schwer, Juan Simón MuzásORCiD, M. Biegler, Kai HilgenbergORCiD, Michael RethmeierORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Procedia CIRP |
Jahr der Erstveröffentlichung: | 2022 |
Organisationseinheit der BAM: | 9 Komponentensicherheit |
9 Komponentensicherheit / 9.6 Additive Fertigung metallischer Komponenten | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | Elsevier B.V. |
Jahrgang/Band: | 111 |
Erste Seite: | 92 |
Letzte Seite: | 96 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Bead-on-plate welds; L-PBF; Laser Welding; PBF-LB/M; Seam geometry |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Material / Additive Fertigung | |
Veranstaltung: | 12th CIRP Conference on Photonic Technologies [LANE 2022] |
Veranstaltungsort: | Fürth, Germany |
Beginndatum der Veranstaltung: | 04.09.2022 |
Enddatum der Veranstaltung: | 08.09.2022 |
DOI: | 10.1016/j.procir.2022.08.072 |
URN: | urn:nbn:de:kobv:b43-560012 |
ISSN: | 2212-8271 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY-NC-ND - Namensnennung - Nicht kommerziell - Keine Bearbeitungen 4.0 International |
Datum der Freischaltung: | 19.10.2022 |
Referierte Publikation: | Nein |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |