Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-525330
Multi-dimensional reconstruction of internal defects in additively manufactured steel using photothermal super resolution combined with virtual wave based image processing
- We combine three different approaches to greatly enhance the defect reconstruction ability of active thermographic testing. As experimental approach, laser-based structured illumination is performed in a step-wise manner. As an intermediate signal processing step, the virtual wave concept is used in order to effectively convert the notoriously difficult to solve diffusion-based inverse problem into a somewhat milder wavebased inverse problem. As a final step, a compressed-sensing based optimization procedure is applied which efficiently solves the inverse problem by making advantage of the joint sparsity of multiple blind measurements. To evaluate our proposed processing technique, we investigate an additively manufactured stainless steel sample with eight internal defects. The concerted super resolution approach is compared to conventional thermographic reconstruction techniques and shows an at least four times better spatial resolution.
Autor*innen: | Samim AhmadiORCiD, G. Thummerer, S. Breitwieser, G. Mayr, Julien LecompagnonORCiD, P. Burgholzer, P. Jung, G. Caire, Mathias ZieglerORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | IEEE transactions on industrial informatics |
Jahr der Erstveröffentlichung: | 2021 |
Organisationseinheit der BAM: | 8 Zerstörungsfreie Prüfung |
8 Zerstörungsfreie Prüfung / 8.0 Abteilungsleitung und andere | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | IEEE |
Verlagsort: | New York, NY |
Jahrgang/Band: | 17 |
Ausgabe/Heft: | 11 |
Aufsatznummer: | 3054411 |
Erste Seite: | 7368 |
Letzte Seite: | 7378 |
DDC-Klassifikation: | Naturwissenschaften und Mathematik / Chemie / Analytische Chemie |
Freie Schlagwörter: | ADMM; Active thermography; Additive manufacturing; Block regularization; Internal defects; Joint sparsity; Laser excitation; Multi-dimensional reconstruction; Photothermal super resolution; Stainless steel; Virtual waves |
Themenfelder/Aktivitätsfelder der BAM: | Chemie und Prozesstechnik |
DOI: | 10.1109/tii.2021.3054411 |
URN: | urn:nbn:de:kobv:b43-525330 |
ISSN: | 1551-3203 |
ISSN: | 1941-0050 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY - Namensnennung 4.0 International |
Datum der Freischaltung: | 29.04.2021 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 20.09.2021 |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |