Investigation of liquid metal embrittlement of dual phase steel joints by electro-thermomechanical spot-welding simulation
- A 3D electro-thermomechanical model is established in order to investigate liquid metal embrittlement. After calibration to a dual phase steel of the 1000 MPa tensile strength class, it is used to analyse the thermo-mechanical system of an experimental procedure to enforce liquid metal embrittlement during resistance spot welding. In this procedure, a tensile stress level is applied to zinc coated advanced high strength steel samples during welding. Thereby, liquid metal embrittlement formation is enforced, depending on the applied stress level and the selected material. The model is suitable to determine and visualise the corresponding underlying stresses and strains responsible for the occurrence of liquid metal embrittlement. Simulated local stresses and strains show good conformity with experimentally observed surface crack locations.
Autor*innen: | J. Frei, M. Biegler, Michael RethmeierORCiD, Ch. Böhne, G. Meschut |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Science and technology of welding and joining |
Jahr der Erstveröffentlichung: | 2019 |
Organisationseinheit der BAM: | 9 Komponentensicherheit |
9 Komponentensicherheit / 9.3 Schweißtechnische Fertigungsverfahren | |
Verlag: | Taylor & Francis |
Jahrgang/Band: | 24 |
Ausgabe/Heft: | 7 |
Erste Seite: | 624 |
Letzte Seite: | 633 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Advanced high strength steel; Cracking; Dual phase steel; Electro-thermomechnical model; LME; RSW; Testing method; Zinc coated steel |
Themenfelder/Aktivitätsfelder der BAM: | Material |
DOI: | 10.1080/13621718.2019.1582203 |
ISSN: | 1362-1718 |
ISSN: | 1743-2936 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 10.04.2019 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 26.08.2019 |