Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-596648
Evaluation of the fatigue resistance of butt‑welded joints in towers of wind turbines - A comparison of experimental studies with small scale and component tests as well as numerical based approaches with local concepts
- Wind turbines are exposed to a high number of load cycles during their service lifetime. Therefore, the fatigue strength verification plays an important role in their design. In general, the nominal stress method is used for the fatigue verification of the most common used butt-welded joints. The Eurocode 3 part 1–9 is the current design standard for this field of application. This paper presents recent results of fatigue tests on small-scaled specimens and large components with transverse butt welds to discuss the validity of the FAT-class. Furthermore, results from numerical simulations for the verification with the effective notch stress and the crack propagation approach are used for comparison. Based on the consistency between the numerical results and the fatigue tests, the influence of the seam geometry on the fatigue resistance was investigated. Finally, a prediction of the fatigue strength of butt-welded joints with plate thicknesses up to 80 mm was carried out.
Autor*innen: | R. Glienke, F. Kalkowsky, A. F. Hobbacher, A. Holch, Marc ThieleORCiD, F. Marten, R. Kersten, K.-M. Henkel |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Welding in the world |
Jahr der Erstveröffentlichung: | 2024 |
Organisationseinheit der BAM: | 7 Bauwerkssicherheit |
7 Bauwerkssicherheit / 7.2 Ingenieurbau | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | Springer |
Verlagsort: | Berlin |
Aufsatznummer: | 01630 |
Erste Seite: | 1 |
Letzte Seite: | 26 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Angewandte Physik |
Freie Schlagwörter: | Fatigue strength; Large components; Local approaches; Transverse butt weld; Weld imperfections; Wind energy; Wind turbine tower |
Themenfelder/Aktivitätsfelder der BAM: | Energie |
Energie / Windenergie | |
DOI: | 10.1007/s40194-023-01630-3 |
URN: | urn:nbn:de:kobv:b43-596648 |
ISSN: | 1878-6669 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY - Namensnennung 4.0 International |
Datum der Freischaltung: | 18.03.2024 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 07.05.2024 |
Paper des Monats: | Ja |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |