• Treffer 2 von 2
Zurück zur Trefferliste

Experimental investigation of size effect on fatigue behavior of high strength concrete - concept and preliminary results

  • The worldwide spread of windfarms brings new challenges, especially for concrete structures as a part of towers, connecting joints and foundations of wind turbines. High-cyclic loadings in such structures lead to a high relevance of the subject of fatigue. A proper assessment of the fatigue strength of concrete demands therefore a basis of reliable experimental data and the development of standardized testing methods. This article presents first results of an ongoing research program of BAM (Bundesanstalt für Materialforschung und -prüfung) which is a part of a joint project (WinConFat) funded by the German Federal Ministry for Economic Affairs and Energy. The subproject investigates the effects of size and slenderness of the specimens on the fatigue behaviour of high strength concrete at different stress levels. Not only the fatigue strength, but also the fatigue process itself is monitored by means of several measurement methods. Strain measurements are used to calculate the loadThe worldwide spread of windfarms brings new challenges, especially for concrete structures as a part of towers, connecting joints and foundations of wind turbines. High-cyclic loadings in such structures lead to a high relevance of the subject of fatigue. A proper assessment of the fatigue strength of concrete demands therefore a basis of reliable experimental data and the development of standardized testing methods. This article presents first results of an ongoing research program of BAM (Bundesanstalt für Materialforschung und -prüfung) which is a part of a joint project (WinConFat) funded by the German Federal Ministry for Economic Affairs and Energy. The subproject investigates the effects of size and slenderness of the specimens on the fatigue behaviour of high strength concrete at different stress levels. Not only the fatigue strength, but also the fatigue process itself is monitored by means of several measurement methods. Strain measurements are used to calculate the load dependent elastic modulus in the fatigue hysteresis as indicators for fatigue development. Furthermore, the application of non-destructive methods like acoustic emission analysis and ultrasonic measurement in laboratory tests gives a deeper insight into damage processes under cyclic loading. The results shall be used to improve design rules for concrete members under fatigue load and to develop or improve non-destructive techniques for in-service structural health monitoring.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • Frei et al_fib 2018_Deckblatt_Impressum_Inhaltsverzeichnis_Abstract.pdf
    eng
  • Frei et al_Experimental investigation of size effect on fatigue behavior of high strength concrete_fib2018 Melbourne.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Vivian Frei, Stephan PirskawetzORCiD, Marc Thiele, Andreas Rogge
Dokumenttyp:Beitrag zu einem Tagungsband
Veröffentlichungsform:Graue Literatur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Proceedings for the 2018 fib Congress held in Melbourne - Extended Abstracts and Keynotes
Jahr der Erstveröffentlichung:2018
Organisationseinheit der BAM:7 Bauwerkssicherheit
7 Bauwerkssicherheit / 7.0 Abteilungsleitung und andere
7 Bauwerkssicherheit / 7.1 Baustoffe
7 Bauwerkssicherheit / 7.2 Ingenieurbau
Herausgeber (Institution):Fédération internationale du béton (fib)
Erste Seite:1
Letzte Seite:11
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Angewandte Physik
Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurbau
Freie Schlagwörter:Acoustic emission testing; Compressive cyclic loading; Fatigue; High-strength concrete; Non-destructive testing; Size effect; Slenderness effect; Ultrasonic testing
Themenfelder/Aktivitätsfelder der BAM:Energie
Infrastruktur
Material
Material / Degradation von Werkstoffen
Veranstaltung:5th International fib Congress: Better - Smarter - Stronger
Veranstaltungsort:Melbourne, Australia
Beginndatum der Veranstaltung:08.10.2018
Enddatum der Veranstaltung:11.10.2018
ISBN:978-1-877040-14-6
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:31.10.2018
Referierte Publikation:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.