Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-517441
First time additively manufactured advanced ceramics by using two-photon polymerization for powder processing
- Methods and materials are presented here, which enable the manufacturing of fine structures using a 3D-printing method known as two-photon polymerization (2PP). As traditional photolithography methods for structuring ceramic slurries do not function with 2PP, due to light scattering on ceramic particles, a novel water-based photoresist with high ceramic loading of extremely well dispersed ceramic nano particles was developed. This photoresist is basically a ceramic slurry containing a photocurable agent and a photoinitiator to be crosslinkable with the 780 nm wavelength femtosecond laser light source of the 2PP machine. It is demonstrated that it is possible to gain a highly transparent and low viscous slurry suitable for 2PP processing. This work shows the development of the slurry, first printing results and the post-printing processes required to form three dimensional ceramic microstructures consisting of alumina toughened zirconia (ATZ).
Autor*innen: | Johanna Christiane Sänger, Brian Richard PauwORCiD, Heinz SturmORCiD, Jens GünsterORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Open Ceramics |
Jahr der Erstveröffentlichung: | 2020 |
Organisationseinheit der BAM: | 5 Werkstofftechnik |
5 Werkstofftechnik / 5.4 Multimateriale Fertigungsprozesse | |
6 Materialchemie | |
6 Materialchemie / 6.5 Synthese und Streuverfahren nanostrukturierter Materialien | |
6 Materialchemie / 6.6 Physik und chemische Analytik der Polymere | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | Elsevier Ltd. |
Jahrgang/Band: | 4 |
Erste Seite: | 100040 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | 2PP; 3D-printing; ATZ; Additive manufacturing; Alumina toughened zirconia; Ceramic nano particles; Nano-ceramic-additive-manufacturing photoresin; NanoCAM; SchwarzP cells; Slurry; Two-photon polymerization |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Material / Additive Fertigung | |
Material / Nano | |
DOI: | 10.1016/j.oceram.2020.100040 |
URN: | urn:nbn:de:kobv:b43-517441 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY-NC-ND - Namensnennung - Nicht kommerziell - Keine Bearbeitungen 4.0 International |
Datum der Freischaltung: | 07.12.2020 |
Referierte Publikation: | Nein |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |