Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-560525
XCT and DLW: Synergies of Two Techniques at Sub-Micrometer Resolution
- Direct Laser Writing (DLW) and X-ray computed tomography (XCT) both offer unique possibilities in their respective fields. DLW produces full three-dimensional (3D) polymer structures on the microscale with resolutions below 100 nm. The fabricated structures can be analysed by XCT or X-ray microscopy (XRM), which incorporates additional X-ray lenses, in three dimensions down to a minimal basic spatial resolution of about 500 nm or 50 nm, respectively. In this work, two different DLW structures are analysed via XCT. Internal defects are detected and analysed for the purpose of quality control. Defects and structures with sizes down to 1.5 µm are successfully analysed. A 3D reconstruction and internal, hidden features of the fabricated structures are shown and discussed. In a first-of-its-kind study, we demonstrate the detectability of a single-voxel line inside a fabricated structure that would not be detectable with SEM or light microscopy. Furthermore, the direct fabrication on a PETDirect Laser Writing (DLW) and X-ray computed tomography (XCT) both offer unique possibilities in their respective fields. DLW produces full three-dimensional (3D) polymer structures on the microscale with resolutions below 100 nm. The fabricated structures can be analysed by XCT or X-ray microscopy (XRM), which incorporates additional X-ray lenses, in three dimensions down to a minimal basic spatial resolution of about 500 nm or 50 nm, respectively. In this work, two different DLW structures are analysed via XCT. Internal defects are detected and analysed for the purpose of quality control. Defects and structures with sizes down to 1.5 µm are successfully analysed. A 3D reconstruction and internal, hidden features of the fabricated structures are shown and discussed. In a first-of-its-kind study, we demonstrate the detectability of a single-voxel line inside a fabricated structure that would not be detectable with SEM or light microscopy. Furthermore, the direct fabrication on a PET substrate is shown to overcome the high X-ray absorbance of commonly used glass substrates. Attenuation spectra of SZ2080 and glass substrates are compared to a fabrication route direct on a 170 µm PET foil. The practical aspects of XCT measurements for DLW structures on different substrates will be discussed.…
Autor*innen: | Sven FritzscheORCiD, Gerd-Rüdiger Jaenisch, Lina PavasaryteORCiD, Alexander FunkORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Applied Science |
Jahr der Erstveröffentlichung: | 2022 |
Organisationseinheit der BAM: | 6 Materialchemie |
6 Materialchemie / 6.6 Physik und chemische Analytik der Polymere | |
8 Zerstörungsfreie Prüfung | |
8 Zerstörungsfreie Prüfung / 8.0 Abteilungsleitung und andere | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | MDPI |
Verlagsort: | Basel |
Jahrgang/Band: | 12 |
Ausgabe/Heft: | 20 |
Aufsatznummer: | 10488 |
Erste Seite: | 1 |
Letzte Seite: | 15 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | 2PP; Direct laser writing; Non-destructive testing; Two-photon polymerization; X-ray microscopy; XCT |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Material / Nano | |
DOI: | 10.3390/app122010488 |
URN: | urn:nbn:de:kobv:b43-560525 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY - Namensnennung 4.0 International |
Datum der Freischaltung: | 20.10.2022 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 07.11.2022 |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |