Dynamic mechanical analysis of epoxy-matrix cross linking measured in-situ using an elastomer container
- A new patented dynamic mechanical analysis (DMA) is presented, where the tensile, bending- or torsional stiffness of a media can be characterized in-situ during the phase transition from liquid to solid. An epoxy system, e.g. Hexion L285/H287, is filled into an elastomer container, such as a silicone tube. This can be mounted into a conventional DMA and, based on a linear viscoelastic approach, the storage modulus (E’;G’), the loss modulus (E’’;G’’) and the loss angle tan(delta) can be measured at constant temperature as a function of time in order to investigate the liquid to sol-gel to solid transition. With this new method, the stiffness increase as a result of the cure process can be directly measured more precisely than with a rheometer in a shear plate set-up, because using an elastomer container gives a defined cross section for calculating the Young’s modulus.
Autor*innen: | Volker TrappeORCiD |
---|---|
Koautor*innen: | Patrick Sachs |
Dokumenttyp: | Vortrag |
Veröffentlichungsform: | Präsentation |
Sprache: | Englisch |
Jahr der Erstveröffentlichung: | 2022 |
Organisationseinheit der BAM: | 5 Werkstofftechnik |
5 Werkstofftechnik / 5.3 Polymere Verbundwerkstoffe | |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Angewandte Physik |
Freie Schlagwörter: | Cross linking; Cure process; Dynamic mechanical analysis (DMA); Thermoset polymers |
Themenfelder/Aktivitätsfelder der BAM: | Energie |
Veranstaltung: | 20th European Conference on Composite Materials, ECCM20 |
Veranstaltungsort: | Lausanne, Switzerland |
Beginndatum der Veranstaltung: | 26.06.2022 |
Enddatum der Veranstaltung: | 30.06.2022 |
Zugehöriger Identifikator: | https://nbn-resolving.org/urn:nbn:de:kobv:b43-569651 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 11.07.2022 |
Referierte Publikation: | Nein |
Eingeladener Vortrag: | Nein |