Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-569651
Dynamic mechanical analysis of epoxy-matrix cross linking measured in-situ using an elastomer container
- A new patented dynamic mechanical analysis (DMA) is presented, where the tensile, bending- or torsional stiffness of a media can be characterized in-situ during the phase transition from liquid to solid. An epoxy system, e.g. Hexion L285/H287, is filled into an elastomer container, such as a silicone tube. This can be mounted into a conventional OMA and, based on a linear viscoelastic approach, the storage modulus (E';G'), the loss modulus (E'';G'') and the loss angle tan(δ) can be measured at constant temperature as a function of time in order to investigate the liquid to sol-gel to solid transition. With this new method, the stiffness increase as a result of the cure process can be directly measured more precisely than with a rheometer in a shear plate set-up, because using an elastomer container gives a defined cross section for calculating the Young's modulus.
Autor*innen: | Volker TrappeORCiD, Patrick Sachs |
---|---|
Persönliche Herausgeber*innen: | A. P. Vassilopoulos, V. Michaud |
Dokumenttyp: | Beitrag zu einem Tagungsband |
Veröffentlichungsform: | Graue Literatur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Composites meet sustainability - Proceedings of the 20th European conference on composite materials, ECCM20, 26-30 June, 2022, Lausanne, Switzerland |
Jahr der Erstveröffentlichung: | 2022 |
Organisationseinheit der BAM: | 5 Werkstofftechnik |
5 Werkstofftechnik / 5.3 Polymere Verbundwerkstoffe | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Herausgeber (Institution): | Ecole Polytechnique Fédérale de Lausanne (EPFL) |
Verlag: | Composite Construction Laboratory (CCLab) |
Verlagsort: | Lausanne |
Jahrgang/Band: | Vol. 5 - Applications and structures |
Erste Seite: | 181 |
Letzte Seite: | 186 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Cross linking; Cure process; Dynamic mechanical analysis (DMA); Thermoset polymers |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Veranstaltung: | 20th European Conference on Composite Materials |
Veranstaltungsort: | Lausanne, Switzerland |
Beginndatum der Veranstaltung: | 26.06.2022 |
Enddatum der Veranstaltung: | 30.06.2022 |
URN: | urn:nbn:de:kobv:b43-569651 |
URL: | https://infoscience.epfl.ch/record/298799 |
ISBN: | 978-2-9701614-0-0 |
Zugehöriger Identifikator: | https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/55213 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY-NC - Namensnennung - Nicht kommerziell 4.0 International |
Datum der Freischaltung: | 15.02.2023 |
Referierte Publikation: | Nein |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |