Cyclic operation performance of 9-12% Cr ferritic-martensitic steels part 2: Microstructural evolution during cyclic loading and its representation in a physically-based micromechanical model
- The current competitive situation on electricity markets forces conventional power plants into cyclic operation regimes with frequent load shifts and starts/shutdowns. In the present work, the cyclic mechanical behavior of ferritic-martensitic 9-12 % Cr steels under isothermal and thermomechanical loading was investigated for the example of grade P92 material. A continuous softening was observed under all loading conditions. The introduction of hold periods to the applied cycles reduced material lifetime, with most prominent effects at technologically relevant small strain levels. The microstructural characterization reveals a coarsening of the original “martensitic” lath-type microstructure to a structure with polygonal subgrains and reduced dislocation density. The microstructural data forms the input for a physically-based modelling approach.
Autor*innen: | Leonardo Agudo JácomeORCiD, Gert Nolze, Farshad Roohbakhshan, Bernard FedelichORCiD, Jürgen Olbricht, Birgit SkrotzkiORCiD |
---|---|
Dokumenttyp: | Beitrag zu einem Tagungsband |
Veröffentlichungsform: | Graue Literatur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Fit for Future - Advanced Manufacturing Technologies, Materials and Lifetime - Proceedings of the 45th MPA-Seminar |
Jahr der Erstveröffentlichung: | 2019 |
Organisationseinheit der BAM: | 5 Werkstofftechnik |
5 Werkstofftechnik / 5.1 Mikrostruktur Design und Degradation | |
5 Werkstofftechnik / 5.2 Metallische Hochtemperaturwerkstoffe | |
5 Werkstofftechnik / 5.5 Materialmodellierung | |
Verlag: | MPA (Materialprüfungsanstalt Universität Stuttgart) |
Verlagsort: | Stuttgart |
Erste Seite: | 80 |
Letzte Seite: | 85 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Angewandte Physik |
Freie Schlagwörter: | EBSD; Micromechanical model; P92; TEM; Tempered Martensite Ferritic Steels |
Themenfelder/Aktivitätsfelder der BAM: | Energie |
Veranstaltung: | 45. MPA-Seminar |
Veranstaltungsort: | Leinfelden-Echterdingen, Germany |
Beginndatum der Veranstaltung: | 01.10.2019 |
Enddatum der Veranstaltung: | 02.10.2019 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 17.01.2020 |
Referierte Publikation: | Nein |