Creep of Directionally Solidified Eutectics Ni/Ni3 Al–NbC under Thermal Cycling
- A nickel-based eutectic alloy with a γ/γ'-NbC structure was directionally solidified with a planar front. The specimens were tested for creep under sawtooth thermal cycling in the temperature range from 600 to 1100°C. It has been established that the lifetime under the conditions of thermal cycling is about five times shorter than it is predicted by the linear damage accumulation rule on the basis of results of isothermal creep tests. Faster creep under thermal cycling is caused by the rapid coarsening of the γ/γ' microstructure due to the periodic partial dissolution and reprecipitation of the γ' phase in heating and cooling half-cycles.
Autor*innen: | I. L. Svetlov, A. I. Epishin, N. V. Petrushin, G. Gerstein, Gert Nolze, H. J. Maier |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Inorganic Materials: Applied research |
Jahr der Erstveröffentlichung: | 2022 |
Organisationseinheit der BAM: | 5 Werkstofftechnik |
5 Werkstofftechnik / 5.1 Mikrostruktur Design und Degradation | |
Verlag: | Springer Science + Business Media |
Verlagsort: | Dordrecht |
Jahrgang/Band: | 13 |
Ausgabe/Heft: | 4 |
Erste Seite: | 1099 |
Letzte Seite: | 1108 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Carbide phase NbC; Creep under thermal cycling; High temperature nickel-based eutectic alloys; In-situ composites; γ/γ' matrix |
Themenfelder/Aktivitätsfelder der BAM: | Material |
DOI: | 10.1134/S2075113322040347 |
ISSN: | 2075-1133 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 04.07.2022 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 03.08.2022 |