• Treffer 7 von 0
Zurück zur Trefferliste

The influence of local defects and nonlinear matrix behaviour on the failure process of fiber reinforced composites

  • The aim of the paper is to analyse the failure process taking place on microscale in fiber reinforced composites. The failure is initiated at microscopical defects presumingly in the interface. The circumferential propagation of interface cracks starting at microdefects in unidirectional plies under transverse loading is studied using a representative volume element. First a linear elastic fracture mechanical analysis of interface cracks in a carbon fiber reinforced epoxy resin is performed by calculating the mixed mode energy release rate using the virtual crack closure method. The influence of the fiber spacing is studied by varying the fiber volume fraction. The total energy release rate rapidly grows after crack initiation indicating an unstable crack propagation. The first phase is dominated by mode I. The mode II energy release rate starts slightly delayed but surpasses the mode I part after a short crack length. By increasing the fiber volume fraction the maximum of the energyThe aim of the paper is to analyse the failure process taking place on microscale in fiber reinforced composites. The failure is initiated at microscopical defects presumingly in the interface. The circumferential propagation of interface cracks starting at microdefects in unidirectional plies under transverse loading is studied using a representative volume element. First a linear elastic fracture mechanical analysis of interface cracks in a carbon fiber reinforced epoxy resin is performed by calculating the mixed mode energy release rate using the virtual crack closure method. The influence of the fiber spacing is studied by varying the fiber volume fraction. The total energy release rate rapidly grows after crack initiation indicating an unstable crack propagation. The first phase is dominated by mode I. The mode II energy release rate starts slightly delayed but surpasses the mode I part after a short crack length. By increasing the fiber volume fraction the maximum of the energy release rate shifts to smaller crack angles.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • 2016 ECCM17.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Christian Marotzke
Koautor*innen:Titus Feldmann
Dokumenttyp:Vortrag
Veröffentlichungsform:Präsentation
Sprache:Englisch
Jahr der Erstveröffentlichung:2016
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:fracture mechanics; interface crack; plasticity
Veranstaltung:ECCM17
Veranstaltungsort:Munich, Germany
Beginndatum der Veranstaltung:27.06.2016
Enddatum der Veranstaltung:30.06.2016
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:20.07.2016
Referierte Publikation:Nein
Eingeladener Vortrag:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.