• Treffer 3 von 0
Zurück zur Trefferliste

Selective laser sintering in combination with layerwise slurry deposition for the additive manufacture of sic ceramics

  • Selective laser sintering is a well-established technology for the additive manufacture of metallic and polymeric parts. For the additive manufacture of ceramic parts some examples for its successful application do exist, also. In this context, the selective laser sintering of SiC ceramic powders has been studied extensively in the past. Despite its low sintering activity, SiC is particularly suited for the selective laser sintering process, because of the possibility to form SiO2 at elevated temperatures in oxidizing ambient. The SiO2 formed can act as a binder within the laser sintering process. In the present work densely packed powder beds generated by the Layerwise Slurry Deposition (LSD) technology are selectively sintered by a cw. fiber laser. The layerwise slurry deposition is an innovative process for the deposition of layers in additive manufacturing. A slurry with no or very small organic content is repetitively spread as thin layers on each other by means of a doctorSelective laser sintering is a well-established technology for the additive manufacture of metallic and polymeric parts. For the additive manufacture of ceramic parts some examples for its successful application do exist, also. In this context, the selective laser sintering of SiC ceramic powders has been studied extensively in the past. Despite its low sintering activity, SiC is particularly suited for the selective laser sintering process, because of the possibility to form SiO2 at elevated temperatures in oxidizing ambient. The SiO2 formed can act as a binder within the laser sintering process. In the present work densely packed powder beds generated by the Layerwise Slurry Deposition (LSD) technology are selectively sintered by a cw. fiber laser. The layerwise slurry deposition is an innovative process for the deposition of layers in additive manufacturing. A slurry with no or very small organic content is repetitively spread as thin layers on each other by means of a doctor blade. During the deposition process, the ceramic particles settle to form thin layers of about 100 µm which have a high packing density (typical 55-60%). This high powder packing density is the result of a slip casting process: When a layer is deposited on a previously dried porous layer, the water is drawn into the pores by capillary forces. The LSD process therefore shares aspects of tape casting and slip casting. An additional benefit of the LSD technology is the free choice of the size of the ceramic particles used. Compared to the processing of dry flowable powders, especially small particles can be very well processed.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • Zocca_Selective laser sintering in combination with layerwise slurry deposition for the additive manufacture of sic ceramics
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Jens GünsterORCiD
Koautor*innen:Andrea Zocca
Dokumenttyp:Vortrag
Veröffentlichungsform:Präsentation
Sprache:Englisch
Jahr der Erstveröffentlichung:2016
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:additive manufacturing
Veranstaltung:40th International Conference and Expo on Advanced Ceramics and Composites
Veranstaltungsort:Daytona Beach, FL, USA
Beginndatum der Veranstaltung:24.01.2016
Enddatum der Veranstaltung:29.01.2016
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:02.11.2016
Referierte Publikation:Nein
Eingeladener Vortrag:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.