• Treffer 9 von 17
Zurück zur Trefferliste

Wear behaviour of low IR-emission titanate ceramics under gross slip fretting conditions against steel and alpha-alumina

  • The tribological behavior of different low infrared (IR) emission ceramic materials from the titanate group has been investigated at room temperature under gross slip fretting conditions against 100Cr6 ball bearing steel and α-alumina as the counterface materials. For all material pairs, friction and wear depended largely on the relative humidity of the environment. When paired with steel the low IR-emission ceramic disks showed higher wear resistance. Under dry conditions, almost no wear was found on the low IR-emission ceramic specimen. The high wear on the steel counter body is caused not only by tribo-oxidation, which is the main wear mechanism, but also by abrasion. In dry conditions a COF of 0.6 and in humid conditions a COF of 0.2 have been measured. When paired with α-alumina the results on wear are just opposite to those with steel counterbody and the low IR-emission ceramic materials show much lower wear resistance under all conditions. This is explained by the predominanceThe tribological behavior of different low infrared (IR) emission ceramic materials from the titanate group has been investigated at room temperature under gross slip fretting conditions against 100Cr6 ball bearing steel and α-alumina as the counterface materials. For all material pairs, friction and wear depended largely on the relative humidity of the environment. When paired with steel the low IR-emission ceramic disks showed higher wear resistance. Under dry conditions, almost no wear was found on the low IR-emission ceramic specimen. The high wear on the steel counter body is caused not only by tribo-oxidation, which is the main wear mechanism, but also by abrasion. In dry conditions a COF of 0.6 and in humid conditions a COF of 0.2 have been measured. When paired with α-alumina the results on wear are just opposite to those with steel counterbody and the low IR-emission ceramic materials show much lower wear resistance under all conditions. This is explained by the predominance of abrasion and the relatively large difference in hardness between the low IR-emission ceramic and α-alumina. In high humidity environments the results point to the formation of stable reaction layers causing lower friction and wear.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • 1-s2.0-S0043164814000775-main.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar
Metadaten
Autoren/innen:Rolf Wäsche, Gabriele Steinborn
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Wear
Jahr der Erstveröffentlichung:2014
Organisationseinheit der BAM:5 Werkstofftechnik
5 Werkstofftechnik / 5.5 Technische Keramik
6 Materialschutz und Oberflächentechnik
6 Materialschutz und Oberflächentechnik / 6.3 Makro-Tribologie und Verschleißschutz
Verlag:Elsevier B.V.
Verlagsort:Amsterdam
Jahrgang/Band:315
Ausgabe/Heft:1-2
Erste Seite:11
Letzte Seite:16
Freie Schlagwörter:Ceramic wear; Gross slip fretting; Low IR-emission ceramics; Yttrium titanate; Zirconium titanate
DOI:https://doi.org/10.1016/j.wear.2014.03.006
ISSN:0043-1648
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:20.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:07.04.2014