Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-543504
On the Formation of Eutectics in Variations of the Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy
- Superalloy inspired Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy is known for its gamma-gamma' microstructure and the third Heusler phase. Variations of this alloy, gained by replacing 0.5 or 1 at. pct Al by the equivalent amount of Mo, W, Zr, Hf or B, can show more phases in addition to this three-phase morphology. When the homogenization temperature is chosen too high, a eutectic phase formation can take place at the grain boundaries, depending on the trace elements: Mo and W do not form eutectics while Hf, Zr and B do. In order to avoid the eutectic formation and the potential implied grain boundary weakening, the homogenization temperature must be chosen carefully by differential scanning calorimetry measurements. A too low homogenization temperature, however, could impede the misorientation alignment of the dendrites in the grain. The influence of grain boundary phases and incomplete dendrite re-orientation are compared and discussed.
Autor*innen: | Anna Maria ManzoniORCiD, F. Dubois, M. S. Mousa, C. von Schlippenbach, D. M. TöbbensORCiD, Yasemin YesilcicekORCiD, E. ZaiserORCiD, René Hesse, S. Haas, U. GlatzelORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Metallurgical and Materials Transactions A |
Jahr der Erstveröffentlichung: | 2021 |
Organisationseinheit der BAM: | 5 Werkstofftechnik |
5 Werkstofftechnik / 5.1 Mikrostruktur Design und Degradation | |
6 Materialchemie | |
6 Materialchemie / 6.2 Material- und Oberflächentechnologien | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | Springer |
Jahrgang/Band: | 52 |
Ausgabe/Heft: | 1 |
Erste Seite: | 143 |
Letzte Seite: | 150 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Eutectic; High entropy alloy; Homogenization |
Themenfelder/Aktivitätsfelder der BAM: | Material |
DOI: | 10.1007/s11661-020-06091-7 |
URN: | urn:nbn:de:kobv:b43-543504 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY - Namensnennung 4.0 International |
Datum der Freischaltung: | 16.02.2022 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 16.02.2022 |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |