- Treffer 1 von 1
Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-580070
Odour testing of building products: Examinations for an on-going development of the test standard ISO 16000-28
- VOC-emissions and their odours from building products and furnishings present indoors should not have an impact on personal well-being or health. Odours can be measured by applying the standard ISO 16000-28. Indoor air determination of odour emissions from building products using test chambers. One of the described procedures is the assessment of perceived intensity using a comparative scale by a group of panellists. In this paper, the perceived intensity sampling procedure and its evaluation method are investigated and shown to need improvement. New technical developments in the methodology used to increase the reproducibility of measurement results are discussed. Since odour tests are used for labelling, they have a major influence on the assessment of construction products, similar to the procedure of the German Committee for Health Evaluation of Building Products (AgBB). In the original ISO standard, the evaluation is typically performed using a sampling container separated fromVOC-emissions and their odours from building products and furnishings present indoors should not have an impact on personal well-being or health. Odours can be measured by applying the standard ISO 16000-28. Indoor air determination of odour emissions from building products using test chambers. One of the described procedures is the assessment of perceived intensity using a comparative scale by a group of panellists. In this paper, the perceived intensity sampling procedure and its evaluation method are investigated and shown to need improvement. New technical developments in the methodology used to increase the reproducibility of measurement results are discussed. Since odour tests are used for labelling, they have a major influence on the assessment of construction products, similar to the procedure of the German Committee for Health Evaluation of Building Products (AgBB). In the original ISO standard, the evaluation is typically performed using a sampling container separated from the emission chamber. For a better sample presentation, an adapter was developed to connect the emission test chamber to the evaluation funnel and thus enable an odour assessment which is comparable to a direct measurement. The investigations show that losses of odourous substances can be greatly reduced, which is very desirable when seeking to obtain reliable results in odour measurement. Another experimental series was carried out to reduce the measurement effort in the evaluation of perceived intensity. Application of the developed greater than or less than/equal to. query could be helpful here. The results show that the query mostly leads to the same result as the evaluation of the perceived intensity using the method according to the standard but is much easier to perform. Overall, the results can contribute to improving the acceptance of the evaluation of perceived intensity using ISO 16000-28 and to determining odours from building materials increasingly more precisely.…
Autor*innen: | S. BrandtORCiD, F. Brozowski, Wolfgang HornORCiD, B. MüllerORCiD |
---|---|
Dokumenttyp: | Beitrag zu einem Tagungsband |
Veröffentlichungsform: | Graue Literatur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Proceedings of healthy buildings 2023 Europe |
Jahr der Erstveröffentlichung: | 2023 |
Organisationseinheit der BAM: | 4 Material und Umwelt |
4 Material und Umwelt / 4.5 Kunst- und Kulturgutanalyse | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | ISIAQ (International Society of Indoor Air Quality and Climate) |
Verlagsort: | Herndon, VA, USA |
Erste Seite: | 345 |
Letzte Seite: | 352 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Sanitär- und Kommunaltechnik; Umwelttechnik |
Freie Schlagwörter: | Building material; Emission test chamber; Odour; Perceived intensity; VOC |
Themenfelder/Aktivitätsfelder der BAM: | Umwelt |
Umwelt / Umwelt-Material-Interaktionen | |
Veranstaltung: | Healthy Buildings 2023 Europe |
Veranstaltungsort: | Aachen, Germany |
Beginndatum der Veranstaltung: | 11.06.2023 |
Enddatum der Veranstaltung: | 14.06.2023 |
URN: | urn:nbn:de:kobv:b43-580070 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY - Namensnennung 4.0 International |
Datum der Freischaltung: | 31.07.2023 |
Referierte Publikation: | Nein |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |