Recovery of copper from small grain size fractions of municipal solid waste incineration bottom ash by means of density separation
- Small grain size fractions of municipal solid waste incineration (MSWI) bottom ash (BA) contain elemental and chemically bonded metals in appreciable amounts, especially copper. Investigations with a centrifugal concentrator were carried out using samples, which had been treated with different impact devices. Partly the impacts of single devices were visible in outlines, but mostly the surfaces of the metals were still covered with mineral residues. To generate copper rich fractions, parameters of the separation process should ensure mass yields <2%, best between 0.5 and 1%. The density of the concentrates is then generally >3.2 g/cm3. Best results were achieved with material from a special treatment train which is adapted to grain sizes <2 mm. Reliable copper contents between 20 and 40% (single runs >50%) could be realised. However, considering the required mass yields, referred to this subset only 150–170 g copper would be recovered from 1 Mg MSWI BA. Furthermore, this copper isSmall grain size fractions of municipal solid waste incineration (MSWI) bottom ash (BA) contain elemental and chemically bonded metals in appreciable amounts, especially copper. Investigations with a centrifugal concentrator were carried out using samples, which had been treated with different impact devices. Partly the impacts of single devices were visible in outlines, but mostly the surfaces of the metals were still covered with mineral residues. To generate copper rich fractions, parameters of the separation process should ensure mass yields <2%, best between 0.5 and 1%. The density of the concentrates is then generally >3.2 g/cm3. Best results were achieved with material from a special treatment train which is adapted to grain sizes <2 mm. Reliable copper contents between 20 and 40% (single runs >50%) could be realised. However, considering the required mass yields, referred to this subset only 150–170 g copper would be recovered from 1 Mg MSWI BA. Furthermore, this copper is only in parts present in elemental form. A dependable added value of such treatment step seems to be given only, if that enables a recycling of the mineral aggregates (tailings) in parallel to avoid landfill costs.…
Autor*innen: | Olaf Holm, Elia Wollik, Teresa Johanna Bley |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | International Journal of Sustainable Engineering |
Jahr der Erstveröffentlichung: | 2018 |
Organisationseinheit der BAM: | 4 Material und Umwelt |
4 Material und Umwelt / 4.3 Schadstofftransfer und Umwelttechnologien | |
Verlag: | Taylor and Francis |
Verlagsort: | London |
Jahrgang/Band: | 11 |
Ausgabe/Heft: | 4 |
Erste Seite: | 250 |
Letzte Seite: | 260 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Sanitär- und Kommunaltechnik; Umwelttechnik |
Freie Schlagwörter: | Bottom ash; Copper; Density separation |
Themenfelder/Aktivitätsfelder der BAM: | Umwelt |
Umwelt / Circular Economy | |
DOI: | 10.1080/19397038.2017.1355415 |
URL: | https://www.tandfonline.com/doi/full/10.1080/19397038.2017.1355415 |
ISSN: | 1939-7038 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 04.10.2018 |
Referierte Publikation: | Nein |