• Treffer 4 von 0
Zurück zur Trefferliste

Characterisation of biofilms with near-ambient pressure XPS

  • A drawback for X-ray photoelectron spectroscopy is that the measurements must be performed under ultra-high vacuum, which limits the type of samples which can be studied. However, by applying a differentially pumped aperture positioned close to the surface, even wet samples can be measured at near ambient pressure while the energy analyser is still under ultra-high vacuum, as illustrated below. Successful XPS-measurements with pressure up to 30 mbar have been reported using this approach, which opens up a new world of possibilities for ambient pressure measurements with XPS. While there are examples where NAP-XPS has been used to study electrochemical processes and heterogeneous catalysis, little attention has been paid to its potential use in biological materials. Until now, bacteria have only been characterised with conventional XPS, which requires tedious sample preparation usually involving freeze drying, a treatment that may degrade biological sample constituents. By studyingA drawback for X-ray photoelectron spectroscopy is that the measurements must be performed under ultra-high vacuum, which limits the type of samples which can be studied. However, by applying a differentially pumped aperture positioned close to the surface, even wet samples can be measured at near ambient pressure while the energy analyser is still under ultra-high vacuum, as illustrated below. Successful XPS-measurements with pressure up to 30 mbar have been reported using this approach, which opens up a new world of possibilities for ambient pressure measurements with XPS. While there are examples where NAP-XPS has been used to study electrochemical processes and heterogeneous catalysis, little attention has been paid to its potential use in biological materials. Until now, bacteria have only been characterised with conventional XPS, which requires tedious sample preparation usually involving freeze drying, a treatment that may degrade biological sample constituents. By studying biological samples in their native wet states, new insight about composition, absorption and transport of drugs through cell membranes and extracellular polymeric substance (EPS) layers can be obtained. Both artificial model-films of exopolysaccharides and biofilms of Escherichia Coli have been characterised at pressures ranging from ultra-high vacuum to 15 mbar by using SPECS’ EnviroESCA NAP-XPS instrument and conventional XPS. By applying antimicrobials to model biofilms, some of which are known to be resistant towards the antimicrobial in question, the distribution of antimicrobials in biofilms has been studied. Measurement capabilities and limitations of the approach will be discussed.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • 170926 ECASIA2017.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Marit Kjaervik
Koautor*innen:P. Dietrich, A. Thissen, Karin Schwibbert, Wolfgang Unger
Dokumenttyp:Vortrag
Veröffentlichungsform:Präsentation
Sprache:Englisch
Jahr der Erstveröffentlichung:2017
DDC-Klassifikation:Naturwissenschaften und Mathematik / Chemie / Analytische Chemie
Freie Schlagwörter:Alginate; Biofilms; E. coli; NAP-XPS
Veranstaltung:European conferene on applications of surface and interface analysis (ECASIA 17)
Veranstaltungsort:Montpellier, France
Beginndatum der Veranstaltung:25.09.2017
Enddatum der Veranstaltung:29.09.2017
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:18.10.2017
Referierte Publikation:Nein
Eingeladener Vortrag:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.