Das Suchergebnis hat sich seit Ihrer Suchanfrage verändert. Eventuell werden Dokumente in anderer Reihenfolge angezeigt.
  • Treffer 9 von 16
Zurück zur Trefferliste
Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-1278

Ultrasound Technique for the Dynamic Mechanical Analysis (DMA)

  • The objective of this work is to demonstrate the practical application and sensitivity of ultrasound as a high frequency Dynamic Mechanical Analysis DMA technique for the characterisation of polymers. Conventional DMA techniques are used to determine thermo mechanical behaviour of polymers by typically employing dynamic shear or tensile loading modes at defined frequencies between 0.1 and 50 Hz. Sound waves may also be employed for DMA applications and depending on type of wave propagated, shear G´, G´´ and longitudinal L´, L´´ storage or loss modulus and tan (δ) may be determined from the measured acoustic parameters sound velocity and amplitude. The primary advantage of ultrasound DMA is that due to the compact sensor size it can easily be integrated into most manufacturing processes. To demonstrate the sensitivity of ultrasound to variations in the viscoelastic properties of polymers, the acoustic properties of a cured epoxy with an observed glass transition temperature of 86 °CThe objective of this work is to demonstrate the practical application and sensitivity of ultrasound as a high frequency Dynamic Mechanical Analysis DMA technique for the characterisation of polymers. Conventional DMA techniques are used to determine thermo mechanical behaviour of polymers by typically employing dynamic shear or tensile loading modes at defined frequencies between 0.1 and 50 Hz. Sound waves may also be employed for DMA applications and depending on type of wave propagated, shear G´, G´´ and longitudinal L´, L´´ storage or loss modulus and tan (δ) may be determined from the measured acoustic parameters sound velocity and amplitude. The primary advantage of ultrasound DMA is that due to the compact sensor size it can easily be integrated into most manufacturing processes. To demonstrate the sensitivity of ultrasound to variations in the viscoelastic properties of polymers, the acoustic properties of a cured epoxy with an observed glass transition temperature of 86 °C (tan(δ) peak, 1Hz) were monitored in a temperature range from 20 to 200 °C and compared to conventional DMA results. The influence of measurement frequency, dispersion, hysteresis, reflections at material boundaries, and changes in material density on the measured sound velocity and amplitude were taken into account. To support conclusions a wide range of experimental data was evaluated using sensors operating in the frequency ranges 400 to 800 kHz and 3 to 6 MHz. The ultrasound results are compared to the tensile moduli E´, E´´ and tan(δ) measured using a conventional DMA technique operating at 0.1 to 33 Hz. Using different evaluation strategies such as the Williams Landel Ferry WLF equation it was possible to study the sensitivity of wave propagation to variations in the viscoelastic behaviour of a polymer. Taking advantage of this background knowledge, further experimental results are presented with the aim of demonstrating the sensitivity of this technique for cure monitoring applications and to the material transformations: gelation and vitrification. For this purpose an epoxy resin was cured at a range of constant temperatures whereby the curing reaction and the corresponding change in viscoelastic properties were monitored. Analysis techniques employed included ultrasound at 3 to 6 MHz, Differential Scanning Calorimeter DSC and Rheometry at 1 Hz. All results were summarised and presented graphically. Additionally an Arrhenius relationship was employed enabling direct comparison of results obtained from analysis techniques based on different working principles. Using this information, it was possible to demonstrate the practical application and the sensitivity of this technique to even small changes in viscoelastic properties of polymers.zeige mehrzeige weniger

Volltext Dateien herunterladen

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Jarlath McHugh
Dokumenttyp:Dissertation
Veröffentlichungsform:Eigenverlag BAM
Schriftenreihe (Bandnummer):BAM Dissertationsreihe (31)
Sprache:Englisch
Jahr der Erstveröffentlichung:2008
Veröffentlichende Institution:Bundesanstalt für Materialforschung und -prüfung (BAM)
Titel verleihende Institution:Technische Universität Berlin, Fakultät III − Prozesswissenschaften
Gutachter*innen:H. J. Hoffmann, Manfred W. Wagner, Wolfgang Stark
Datum der Abschlussprüfung:24.05.2007
Verlag:Bundesanstalt für Materialforschung und -prüfung (BAM)
Verlagsort:Berlin
Jahrgang/Band:31
Erste Seite:1
Letzte Seite:153
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:Activation Energy; Dynamic Mechanical Analysis; Frequency Dependence; Rheometry; Ultrasound Cure Monitoring
URN:urn:nbn:de:kobv:b43-1278
ISSN:1613-4249
ISBN:978-3-9812072-0-0
Verfügbarkeit des Dokuments:Datei für die Öffentlichkeit verfügbar ("Open Access")
Lizenz (Deutsch):License LogoAllgemeines Deutsches Urheberrecht
Datum der Freischaltung:23.01.2015
Referierte Publikation:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.