Dry friction and wear rates as under liquid lubrication of ceramic/carbon couples up to 450°C
- In a high temperature tribometer, stationary carbon has been tested against different rotating ceramics (SiC, Si3N4, Al2O3, WC-6Ni, MgO-ZrO2, (Ti, Mo)(C, N)) and stainless steel (DIN 1.4876). The rotating discs were grinded, polished and/or lapped. For most material combinations, the wear morphology is known from available literature. A transfer film with a typical wear pattern was found on the rotating disc. The combination of antimony graphite EK3245 against MgO-ZrO2 did not form carbonaceous transfer layer. Through advanced variation of the roughness up to Rpk=0.011?µm, the wear rate has been reduced to Kv 3.5×10-8?mm3/N?m at a stable coefficient of friction in a millirange of µ~0.008 for a sliding distance of 20.000?m.
Autor*innen: | J. Kleemann, Mathias WoydtORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Industrial Lubrication and Tribology |
Jahr der Erstveröffentlichung: | 2004 |
Verlag: | Peterson |
Verlagsort: | Droitwich, Worcs. |
Jahrgang/Band: | 56 |
Ausgabe/Heft: | 1 |
Erste Seite: | 38 |
Letzte Seite: | 51 |
Freie Schlagwörter: | Carbon; Ceramics; Liquids; Lubrication; Tribology |
DOI: | 10.1108/00368790410515371 |
ISSN: | 0036-8792 |
Verfügbarkeit des Dokuments: | Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access") |
Bibliotheksstandort: | Sonderstandort: Publica-Schrank |
Datum der Freischaltung: | 19.02.2016 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 15.03.2004 |