• Treffer 3 von 7
Zurück zur Trefferliste

Permeation through plastic dangerous goods packaging during transport in freight containers - Detection of potentially explosive mixtures in containers under normal conditions of carriage

  • The key point within the scope of this research project was to find out whether there was a risk of creating an explosive atmosphere by permeation of flammable liquid compounds during transport of dangerous goods in freight containers under normal conditions of carriage. Therefore, all aspects that had an influence on the formation of such an atmosphere had to be considered. The most important influencing factors were permeation, air change in the freight container and ambient temperature. The first step was to investigate the permeation with different packaging materials, charge and temperatures. Furthermore, the air change rates of different freight containers were measured. A few climate tests with containers on ships, e.g. to Singapore, were performed to assess normal conditions of carriage. Another important point was measuring the solvent (toluene) concentration in the gas phase in a freight container loaded with plastic intermediate bulk containers (IBCs) filled with toluene. ToThe key point within the scope of this research project was to find out whether there was a risk of creating an explosive atmosphere by permeation of flammable liquid compounds during transport of dangerous goods in freight containers under normal conditions of carriage. Therefore, all aspects that had an influence on the formation of such an atmosphere had to be considered. The most important influencing factors were permeation, air change in the freight container and ambient temperature. The first step was to investigate the permeation with different packaging materials, charge and temperatures. Furthermore, the air change rates of different freight containers were measured. A few climate tests with containers on ships, e.g. to Singapore, were performed to assess normal conditions of carriage. Another important point was measuring the solvent (toluene) concentration in the gas phase in a freight container loaded with plastic intermediate bulk containers (IBCs) filled with toluene. To confirm that the measured values were in the right range, the toluene concentration in the gas phase in a container was calculated with different packaging materials, air change rates and temperatures. The results of the measurements and calculations have shown that safety layers in the packaging wall, e.g. the copolymer of ethylene and vinyl alcohol (EVOH) and polyamide, can reduce the rate of permeation by more than a decimal power, but the lower explosive limit of toluene is easily reached within a few hours at 40°C charge temperature if there is no barrier.zeige mehrzeige weniger

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:John Bethke, Thomas Goedecke, Wolfgang Jahnke
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Packaging technology & science
Jahr der Erstveröffentlichung:2013
Verlag:Wiley
Verlagsort:Chichester, UK
Jahrgang/Band:26
Ausgabe/Heft:1
Erste Seite:1
Letzte Seite:15
Freie Schlagwörter:Air change; Dangerous goods; Freight container; Lower explosive limit; Permeation
DOI:10.1002/pts.994
ISSN:0894-3214
Verfügbarkeit des Dokuments:Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")
Bibliotheksstandort:Sonderstandort: Publica-Schrank
Datum der Freischaltung:20.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:17.07.2014
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.