• Treffer 1 von 0
Zurück zur Trefferliste

Reference loads for plates with semi-elliptical surface cracks subjected to tension and bending for application within R6 type flaw assessment

  • Two of the authors of the present paper proposed a definition of a reference load F0 which can be used as an alternative option to the common limit load for cases where the definition of the latter might be problematic in the frame of flaw assessment procedures such as R6, BS 7910, SINTAP or FITNET. The reference load is defined as that load at which the ligament yielding parameter Lr approaches one. F0, in general, varies along the crack front. It has to be obtained by finite element analyses but the results can be approximated by analytical expressions. In a previous study of the authors such a solution was presented for tension loaded plates with semi-elliptical surface cracks. In the present paper it is extended to pure bending and to combined bending and tension.

Volltext Dateien herunterladen

  • 1-s2.0-S0013794412004560-main.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Uwe Zerbst, Yusuf Kiyak, Mauro Madia, Andreas Burgold, Gernot Riedel
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Engineering fracture mechanics
Jahr der Erstveröffentlichung:2013
Verlag:Elsevier Science
Verlagsort:Kidlington
Jahrgang/Band:99
Erste Seite:132
Letzte Seite:140
Freie Schlagwörter:BS 7910; FITNET; Flaw assessment; Limit load; R6 procedure; Reference load; SINTAP
DOI:10.1016/j.engfracmech.2012.11.017
ISSN:0013-7944
ISSN:1873-7315
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:20.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:24.03.2014
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.