Fatigue strength and fracture mechanics - A general perspective
- Common fracture mechanics based fatigue considerations are usually limited to the residual lifetime determination of so-called long cracks. The extension of this concept to the total lifetime, as in the S-N curve approach, requires an adequate description of short crack propagation which cannot be based on the Delta K concept, and it must consider the crack closure phenomenon as well as its gradual build-up at the short crack stage. Further, it has to provide a meaningful definition of initial crack dimensions and a solution for the multiple crack problem at stress levels higher than the fatigue limit as it is specific for some configurations such as weldments. This paper aims at a discussion of all these points and offers possible solutions which are illustrated by examples taken from the German IBESS project on fracture mechanics based determination of the fatigue strength of weldments, the results of which will be discussed in more detail in this Special issue.
Autor*innen: | Uwe Zerbst, Mauro Madia, M. Vormwald, T. Beier |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Engineering fracture mechanics |
Jahr der Erstveröffentlichung: | 2018 |
Organisationseinheit der BAM: | 9 Komponentensicherheit |
9 Komponentensicherheit / 9.4 Integrität von Schweißverbindungen | |
Verlag: | Elsevier |
Jahrgang/Band: | 198 |
Erste Seite: | 2 |
Letzte Seite: | 23 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Endurance limit; Fatigue strength; Fracture mechanics; Multiple cracking; Short crack propagation; Weldments |
Themenfelder/Aktivitätsfelder der BAM: | Material |
DOI: | 10.1016/j.engfracmech.2017.04.030 |
ISSN: | 0013-7944 |
ISSN: | 1873-7315 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 04.12.2018 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 04.12.2018 |