• Treffer 1 von 11
Zurück zur Trefferliste

Validation of an alternative method for testing the chemical compatibility of liquids with polyethylene packagings for dangerous goods

  • Safety risks may ensue when the chemicals contained in polyethylene packagingsa age and damage them. To prevent subsequent accidents, the European Dangerous Goods Regulations have laid down requirements for testing the chemical compatibility of liquid dangerous goods transported in polyethylene packagings. The test procedures include 6 months in which the chemical is prestored in the packaging. After this time, the respective design-type tests are performed. Alternative methods with so-called standard liquids, simulating the different types of damaging effects, are also possible. If a packaging has successfully passed the design type tests with a standard liquid, other dangerous goods may also be transported in this packaging, as long as it is demonstrated that they have a less damaging effect than the standard liquid. However, in this area there is only little information and research available. A new potentially effective and time-saving method for comparing the stress crackSafety risks may ensue when the chemicals contained in polyethylene packagingsa age and damage them. To prevent subsequent accidents, the European Dangerous Goods Regulations have laid down requirements for testing the chemical compatibility of liquid dangerous goods transported in polyethylene packagings. The test procedures include 6 months in which the chemical is prestored in the packaging. After this time, the respective design-type tests are performed. Alternative methods with so-called standard liquids, simulating the different types of damaging effects, are also possible. If a packaging has successfully passed the design type tests with a standard liquid, other dangerous goods may also be transported in this packaging, as long as it is demonstrated that they have a less damaging effect than the standard liquid. However, in this area there is only little information and research available. A new potentially effective and time-saving method for comparing the stress crack damaging influence of liquids with standard liquids was proposed by a major German chemical company. The validation of this method, which was carried out on two polyethylene materials, showed the general applicability of the method. Two kinds of wetting solutions were applied to simulate cracking under stress. The influence of prestorage, test temperatures, wetting agents and material was examined. FEM calculations were carried out to ascertain the influence of the sample shape.zeige mehrzeige weniger

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Mario Eiben, Anita SchmidtORCiD, Andreas Menrad, Wolfgang Jahnke, Thomas Goedecke
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Packaging technology & science
Jahr der Erstveröffentlichung:2013
Verlag:Wiley
Verlagsort:Chichester, UK
Jahrgang/Band:26
Ausgabe/Heft:7
Erste Seite:385
Letzte Seite:398
Freie Schlagwörter:Chemical compatibility testing; Dangerous goods packagings; ESCR; Environmental stress cracking; HDPE
DOI:10.1002/pts.1989
ISSN:0894-3214
Verfügbarkeit des Dokuments:Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")
Bibliotheksstandort:Sonderstandort: Publica-Schrank
Datum der Freischaltung:20.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:31.10.2013
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.