Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-532401
Bench-scale fire stability testing - Assessment of protective systems on carbon fibre reinforced polymer composites
- Fire resistance testing of components made of carbon fibre reinforced polymers (CFRP) usually demands intermediate-scale or full-scale testing. A bench-scale test is presented as a practicable and efficient method to assess how different fire protective systems improve the structural integrity of CFRPs during fire. The direct flame of a fully developed fire was applied to one side of the CFRP specimen, which was simultaneously loaded with compressive force. Three different approaches (film, non-woven, and coatings) were applied: paper with a thickness in the range of μm consisting of cellulose nanofibre (CNF)/clay nanocomposite, nonwoven mats with thickness in the range of cm and intumescent coatings with a thickness in the range of mm. The uncoated specimen failed after just 17 s. Protection by these systems provides fire stability, as they multiply the time to failure by as much as up to 43 times. The reduced heating rates of the protected specimens demonstrate the reduced heatFire resistance testing of components made of carbon fibre reinforced polymers (CFRP) usually demands intermediate-scale or full-scale testing. A bench-scale test is presented as a practicable and efficient method to assess how different fire protective systems improve the structural integrity of CFRPs during fire. The direct flame of a fully developed fire was applied to one side of the CFRP specimen, which was simultaneously loaded with compressive force. Three different approaches (film, non-woven, and coatings) were applied: paper with a thickness in the range of μm consisting of cellulose nanofibre (CNF)/clay nanocomposite, nonwoven mats with thickness in the range of cm and intumescent coatings with a thickness in the range of mm. The uncoated specimen failed after just 17 s. Protection by these systems provides fire stability, as they multiply the time to failure by as much as up to 43 times. The reduced heating rates of the protected specimens demonstrate the reduced heat penetration, indicating the coatings’ excellent heat shielding properties. Bench-scale fire stability testing is shown to be suitable tool to identify, compare and assess different approaches to fire protection.…
Autor*innen: | Weronika Tabaka, Sebastian Timme, Tobias Lauterbach, L. Medina, L. A. Berglund, F. Carosio, S. Duquesne, Bernhard SchartelORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Polymer testing |
Jahr der Erstveröffentlichung: | 2021 |
Organisationseinheit der BAM: | 7 Bauwerkssicherheit |
7 Bauwerkssicherheit / 7.5 Technische Eigenschaften von Polymerwerkstoffen | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | Elsevier |
Verlagsort: | Amsterdam |
Jahrgang/Band: | 102 |
Erste Seite: | 7340 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurbau |
Freie Schlagwörter: | Bench-scale fire resistance; Carbon fibre reinforced polymer; Fire stability; Protective coatings |
Themenfelder/Aktivitätsfelder der BAM: | Infrastruktur |
Infrastruktur / Fire Science | |
DOI: | 10.1016/j.polymertesting.2021.107340 |
URN: | urn:nbn:de:kobv:b43-532401 |
ISSN: | 0142-9418 |
ISSN: | 1873-2348 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY - Namensnennung 4.0 International |
Datum der Freischaltung: | 16.09.2021 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 18.10.2021 |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |