Das Suchergebnis hat sich seit Ihrer Suchanfrage verändert. Eventuell werden Dokumente in anderer Reihenfolge angezeigt.
  • Treffer 7 von 25
Zurück zur Trefferliste

Measurement of helium leakage rates through closures of dangerous goods packagings for the assessment of potentially explosive mixtures in freight containers

  • The objective was to find out whether an explosive atmosphere can be created in a freight container by gaseous leakage flow of vapour-air-mixture through leaks in the closures of dangerous goods packagings filled with hazardous liquids. Because of high temperatures during intercontinental carriage, there is a gauge pressure in the free vapour phase inside the packagings which can cause a gaseous leakage flow. Two different methods were applied: Helium limit leakage rates for 23 quantitatively important hazardous liquids concerning their lower explosion limit (LEL) were calculated for a worst case transport scenario (Method 1). Helium leakage rates of five closure types of dangerous goods packagings with volumes of approximately 6 l were measured using the pressure technique by accumulation (Method 2). All types of closures of steel packagings were uncritical. The maximum measured leakage was 33% of the limit leakage rate. The leakage rates of screw closures of plasticThe objective was to find out whether an explosive atmosphere can be created in a freight container by gaseous leakage flow of vapour-air-mixture through leaks in the closures of dangerous goods packagings filled with hazardous liquids. Because of high temperatures during intercontinental carriage, there is a gauge pressure in the free vapour phase inside the packagings which can cause a gaseous leakage flow. Two different methods were applied: Helium limit leakage rates for 23 quantitatively important hazardous liquids concerning their lower explosion limit (LEL) were calculated for a worst case transport scenario (Method 1). Helium leakage rates of five closure types of dangerous goods packagings with volumes of approximately 6 l were measured using the pressure technique by accumulation (Method 2). All types of closures of steel packagings were uncritical. The maximum measured leakage was 33% of the limit leakage rate. The leakage rates of screw closures of plastic jerricans can exceed the LEL if there are production-related patterns such as non-concentricity of the closures and flashes on the neck. Especially for plastic packagings it is important to minimize gaseous leakage flow, because an explosive atmosphere can also be reached by permeation of the individual filling substance or by a combination of both effects. For the assessment of potentially explosive mixtures in freight containers, both mass transfer mechanisms have to be taken into account.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • Schlick-Hasper_et_al-2015-Packaging_Technology_and_Science.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Eva Schlick-Hasper, Oliver Seidler, Thomas Goedecke, M. Kraume
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Packaging technology & science
Jahr der Erstveröffentlichung:2015
Verlag:Wiley & Sons, Ltd.
Verlagsort:Chichester, UK
Jahrgang/Band:28
Ausgabe/Heft:11
Erste Seite:959
Letzte Seite:985
Freie Schlagwörter:Dichtheit; Frachtcontainer; Gefahrgutverpackungen; Leckagerate; Untere Explosionsgrenze; Überdruck
Dangerous goods packagings; Gauge pressure; Leak testing; Leakage rate; Leakproofness; Lower explosion limit
DOI:10.1002/pts.2151
ISSN:0894-3214
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:20.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:26.11.2015
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.